Lampwright Opal Glass Shade 200mm

Two layer opal glass with a standard 30mm gallery fitting, so it will fit most old fittings as well as ours. Sold as a replacement as often as a first fit.

Shades are the part of a wall light that gets damaged, discoloured or simply tired of, and there is rarely any need to replace the whole fitting. Everything here uses either a 30mm gallery, a standard E14 shade ring or a clip fitting, all three of which are stated below, so you can match a shade to a fitting you already own. If you are not sure what you have, send us a photograph of the underside of the shade holder.

Specification

• Height varies with the shade, width 200mm, projection from the wall not applicable
• Materials: glass
• Finish: as listed
• Lamp: not applicable, this is a shade only
• Supply: not applicable
• Switching: not applicable
• Rating: IP20, for dry indoor rooms
• Backplate: not applicable
• Diameter: 200mm
• Fitting: 30mm gallery
• Weight: approximately 0.9 kilograms
• Maximum lamp: 40W incandescent equivalent
• Sold singly, shade only

Fitting

No wiring is involved. A gallery shade drops onto the ring and is held by three thumb screws. A shade ring type sits on the lamp holder under the lamp. Take the old one off before you order if you are unsure which you have.