Halliwell Crystal Egerton Crystal Fan Wall Light Wall Light Pair

A fan of graduated crystal spears set into a brass mount, an Art Deco shape that has been made in England since the nineteen thirties. It suits a stair half landing where you see it from below.

Every crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.

Specification

• Height, per fitting: 400mm, width 340mm, projection from the wall 150mm
• Materials: hand cut lead crystal on a cast brass frame
• Finish: crystal polished clear, brass in your chosen finish
• Lamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: round cast brass, 115mm diameter
• Weight: approximately 11.8 kilograms for the pair
• Lead time: 4 to 6 weeks, cut and strung to order
• Supplied with a cleaning glove and six spare pins
• Sold as a pair

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.