Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light

A single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.

Cast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.

Specification

• Height 290mm, width 160mm, projection from the wall 170mm
• Materials: solid bronze, sand cast backplate, cast bronze arm
• Finish: hand applied patina over bronze, sealed with microcrystalline wax
• Lamp: 1 x G9, maximum 33W, dimmable LED suitable
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: cast bronze, 110mm diameter, 12mm thick
• Weight: approximately 4.1 kilograms
• Lead time: 4 to 6 weeks, cast to order
• Each casting is unique and small variations are expected
• Sold singly

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.