Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light

A stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.

Thrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.

Specification

• Height 260mm, width 300mm, projection from the wall 170mm
• Materials: glazed stoneware with a steel backplate
• Finish: three glazes to choose from
• Lamp: 1 x E27, maximum 60W, dimmable LED suitable
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: steel, 110mm diameter, painted to match
• Weight: approximately 5.4 kilograms
• Lead time: 3 to 4 weeks
• Hairline variation in the surface is characteristic of the material
• Sold singly

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.