Atelier Sconce House Bespoke Integrated Dimming and Control Specification

For a project where the wall lights have to work with a control system. We build the drivers, the addresses and the emergency provision into the fittings rather than leaving it to the installer.

Bespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.

Specification

• Height as specified, width as specified, projection from the wall as specified
• Materials: specified at order, see the notes below
• Finish: any standard finish, or a bespoke finish matched to your sample
• Lamp: specified at order, all our fittings are dimmable unless you ask otherwise
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: sized to cover your existing fixing where possible
• Sizing: applies to any fitting, minimum four
• Approximate weight: 5.0 kilograms
• DALI 2, Casambi or 0 to 10V on request
• Emergency variants with a three hour battery
• Commissioning notes issued with the delivery
• Deposit: 50 per cent at order, balance before dispatch
• Bespoke items are exempt from the 14 day cancellation right once making has begun

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.