The Sconce House Collection Pyrton Slim Tube Plug In Wall Light

A 40mm tube with an opal end cap, mounted vertically or horizontally. Modern, quiet and about as small as a wall light can be and still light anything.

Our own label, drawn here and made for us in small runs. A plug in wall light is the honest answer for a rented flat, a wall with nothing behind it, or a bed that has moved since the electrician came. The flex is braided rather than PVC because a braided flex hanging down a wall looks deliberate and a grey PVC one looks like an accident. Every fitting is supplied ready to use with the plug fitted and a lamp is not included.

Specification

• Height 400mm, width 40mm, projection from the wall 70mm
• Materials: powder coated steel with brass detail
• Finish: four finishes, all applied over a phosphate primer
• Lamp: integral warm white LED, 8W, CRI 90
• Supply: plug in, 2 metre braided flex with a moulded UK plug fitted
• Switching: inline rocker switch on the flex, 400mm from the fitting
• Rating: IP20, for dry indoor rooms
• Backplate: round steel, 100mm diameter, two keyhole slots at 65mm centres
• Mounting: vertical or horizontal, your choice at fitting
• Weight: approximately 1.0 kilograms
• Dimmable if you fit a dimmable lamp and a plug in dimmer
• Convertible to hardwired by an electrician
• Sold singly, lamp not included

Fitting

This is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 1.0 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.