Foundry Nine Kelston Cast Bronze Leaf Set of 4

Four bronze leaves poured and patinated together, for a dining room or a hotel corridor.

Buying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.

Specification

• Height: as the single fitting, width as the single fitting, projection from the wall as the single fitting
• Materials: as the single fitting, see that listing for the full specification
• Finish: one finish across the whole set, chosen at order
• Lamp, per fitting: as the single fitting
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: as the single fitting
• Quantity: 4 fittings
• Saving against buying singly: about 5 per cent
• Total weight: approximately 16.4 kilograms
• Packed in one consignment, checked side by side before boxing
• Sold as a set of 4

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.