Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light

A scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.

Thrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.

Specification

• Height 320mm, width 280mm, projection from the wall 140mm
• Materials: glazed stoneware with a steel backplate
• Finish: three glazes to choose from
• Lamp: 1 x E14 candle, maximum 40W, dimmable LED suitable
• Supply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate
• Switching: no integral switch, wired to a wall switch or a dimmer circuit
• Rating: IP20, for dry indoor rooms
• Backplate: steel, 110mm diameter, painted to match
• Weight: approximately 5.0 kilograms
• Lead time: 3 to 4 weeks
• Hairline variation in the surface is characteristic of the material
• Sold singly

Fitting

This is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.