{"title":"Uplighters","description":"\u003cp\u003eLight thrown at the ceiling and returned to the room soft. Alabaster half moons, plaster shells and brass cups that give a room height without a single visible bulb.\u003c\/p\u003e","products":[{"product_id":"vellum-stone-ashcombe-alabaster-half-moon-uplighter-wall-light","title":"Vellum Stone Ashcombe Alabaster Half Moon Uplighter Wall Light","description":"\u003cp\u003eThe half moon is the quietest way to light a wall. The alabaster is cut from a single block, so the veining runs unbroken across the face and the light picks it out as a slow amber drift rather than a pattern.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 180mm, width 300mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.4 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766937063756,"sku":"SCH-ALB-001-AB","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766937096524,"sku":"SCH-ALB-001-PN","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766937129292,"sku":"SCH-ALB-001-BZ","price":1149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Ashcombe_Alabaster_Half_Moon_Uplighter_Wall_Light.jpg?v=1789048779"},{"product_id":"vellum-stone-ashcombe-alabaster-half-moon-uplighter-wall-light-pair","title":"Vellum Stone Ashcombe Alabaster Half Moon Uplighter Wall Light Pair","description":"\u003cp\u003eThe half moon is the quietest way to light a wall. The alabaster is cut from a single block, so the veining runs unbroken across the face and the light picks it out as a slow amber drift rather than a pattern.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 180mm, width 300mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766937260364,"sku":"SCH-ALB-002-AB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766937293132,"sku":"SCH-ALB-002-PN","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766937325900,"sku":"SCH-ALB-002-BZ","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Ashcombe_Alabaster_Half_Moon_Uplighter_Wall_Light_Pair.jpg?v=1789048524"},{"product_id":"vellum-stone-fenwick-alabaster-bowl-uplighter-on-a-brass-arm-wall-light","title":"Vellum Stone Fenwick Alabaster Bowl Uplighter on a Brass Arm Wall Light","description":"\u003cp\u003eA shallow alabaster bowl carried on a cast brass arm that curves away from the wall. The bowl throws almost all of its light at the ceiling, so a pair will lift a low room without anything glaring at eye level.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 240mm, width 280mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938538316,"sku":"SCH-ALB-015-AB","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938571084,"sku":"SCH-ALB-015-PN","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938603852,"sku":"SCH-ALB-015-BZ","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Fenwick_Alabaster_Bowl_Uplighter_on_a_Brass_Arm_Wall_Light.jpg?v=1789048701"},{"product_id":"vellum-stone-fenwick-alabaster-bowl-uplighter-on-a-brass-arm-wall-light-pair","title":"Vellum Stone Fenwick Alabaster Bowl Uplighter on a Brass Arm Wall Light Pair","description":"\u003cp\u003eA shallow alabaster bowl carried on a cast brass arm that curves away from the wall. The bowl throws almost all of its light at the ceiling, so a pair will lift a low room without anything glaring at eye level.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 240mm, width 280mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938636620,"sku":"SCH-ALB-016-AB","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938669388,"sku":"SCH-ALB-016-PN","price":2399.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938702156,"sku":"SCH-ALB-016-BZ","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Fenwick_Alabaster_Bowl_Uplighter_on_a_Brass_Arm_Wall_Light_Pair.jpg?v=1789048701"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766947516748,"sku":"SCH-BRZ-007-MB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766947549516,"sku":"SCH-BRZ-007-DB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766947582284,"sku":"SCH-BRZ-007-LA","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light.jpg?v=1789048210"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-pair","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Pair","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766949318988,"sku":"SCH-BRZ-008-MB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766949351756,"sku":"SCH-BRZ-008-DB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766949384524,"sku":"SCH-BRZ-008-LA","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Pair.jpg?v=1789048287"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-antique-verdigris","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Antique Verdigris","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766951285068,"sku":"SCH-BRZ-009-VG","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766951317836,"sku":"SCH-BRZ-009-DV","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Antique_Verdigris.jpg?v=1789048096"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022031180,"sku":"SCH-PLS-001-WH","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022063948,"sku":"SCH-PLS-001-ST","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022096716,"sku":"SCH-PLS-001-CH","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light.jpg?v=1789047949"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-pair","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Pair","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022489932,"sku":"SCH-PLS-002-WH","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022522700,"sku":"SCH-PLS-002-ST","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022555468,"sku":"SCH-PLS-002-CH","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Pair.jpg?v=1789047984"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-large","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Large","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 365mm, width 415mm, projection from the wall 185mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767023341900,"sku":"SCH-PLS-003-WH","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767023374668,"sku":"SCH-PLS-003-ST","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767023407436,"sku":"SCH-PLS-003-CH","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Large_1098940f-10b0-4717-ac09-ccd4e9b83bbb.jpg?v=1789047971"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767025865036,"sku":"SCH-PLS-007-DW","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767025897804,"sku":"SCH-PLS-007-OM","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767025930572,"sku":"SCH-PLS-007-SB","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light.jpg?v=1789047950"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light-pair","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light Pair","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767026323788,"sku":"SCH-PLS-008-DW","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767026356556,"sku":"SCH-PLS-008-OM","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767026389324,"sku":"SCH-PLS-008-SB","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light_Pair.jpg?v=1789047964"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light-large","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light Large","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 315mm, width 365mm, projection from the wall 205mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.1 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767026979148,"sku":"SCH-PLS-009-DW","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767027011916,"sku":"SCH-PLS-009-OM","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767027044684,"sku":"SCH-PLS-009-SB","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light_Large_d793139d-0cce-41c3-9f41-c94bedaa3ac6.jpg?v=1789047950"},{"product_id":"chalkhill-studio-pemberley-ceramic-bowl-uplighter-set-of-4","title":"Chalkhill Studio Pemberley Ceramic Bowl Uplighter Set of 4","description":"\u003cp\u003eBowls thrown by one potter in one sitting, which is the only way to get the rim to read the same across a run.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 21.6 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767077146956,"sku":"SCH-SET-008-AB","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077179724,"sku":"SCH-SET-008-PN","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077212492,"sku":"SCH-SET-008-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Ceramic_Bowl_Uplighter_Set_of_4.jpg?v=1789048184"},{"product_id":"chalkhill-studio-pemberley-ceramic-bowl-uplighter-set-of-6","title":"Chalkhill Studio Pemberley Ceramic Bowl Uplighter Set of 6","description":"\u003cp\u003eBowls thrown by one potter in one sitting, which is the only way to get the rim to read the same across a run.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 32.4 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767077245260,"sku":"SCH-SET-009-AB","price":3849.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077278028,"sku":"SCH-SET-009-PN","price":3849.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077310796,"sku":"SCH-SET-009-BZ","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Ceramic_Bowl_Uplighter_Set_of_6.jpg?v=1789048281"},{"product_id":"the-sconce-house-collection-kingsdon-brass-cup-plug-in-uplighter","title":"The Sconce House Collection Kingsdon Brass Cup Plug In Uplighter","description":"\u003cp\u003eA small brass cup that throws everything at the ceiling. Two of these in a low room will do more than a bright ceiling light and cost less to run.\u003c\/p\u003e\u003cp\u003eOur own label, drawn here and made for us in small runs. A plug in wall light is the honest answer for a rented flat, a wall with nothing behind it, or a bed that has moved since the electrician came. The flex is braided rather than PVC because a braided flex hanging down a wall looks deliberate and a grey PVC one looks like an accident. Every fitting is supplied ready to use with the plug fitted and a lamp is not included.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 150mm, width 180mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: powder coated steel with brass detail\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes, all applied over a phosphate primer\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W\u003c\/li\u003e\n\u003cli\u003eSupply: plug in, 2 metre braided flex with a moulded UK plug fitted\u003c\/li\u003e\n\u003cli\u003eSwitching: inline rocker switch on the flex, 400mm from the fitting\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round steel, 100mm diameter, two keyhole slots at 65mm centres\u003c\/li\u003e\n\u003cli\u003eDistribution: 100 per cent upward\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable if you fit a dimmable lamp and a plug in dimmer\u003c\/li\u003e\n\u003cli\u003eConvertible to hardwired by an electrician\u003c\/li\u003e\n\u003cli\u003eSold singly, lamp not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 1.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767084749132,"sku":"SCH-PLG-011-AB","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767084781900,"sku":"SCH-PLG-011-BK","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767084814668,"sku":"SCH-PLG-011-PN","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767084847436,"sku":"SCH-PLG-011-WH","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Kingsdon_Brass_Cup_Plug_In_Uplighter.jpg?v=1789048925"},{"product_id":"the-sconce-house-collection-farmington-plaster-uplighter","title":"The Sconce House Collection Farmington Plaster Uplighter","description":"\u003cp\u003eA small plaster uplighter to paint the colour of the wall, so all you see on a landing is the light and not the fitting.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 220mm, width 260mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 120mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.9 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.9 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111717196,"sku":"SCH-HAL-006-AB","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111749964,"sku":"SCH-HAL-006-BK","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111782732,"sku":"SCH-HAL-006-PN","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111815500,"sku":"SCH-HAL-006-WH","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Farmington_Plaster_Uplighter.jpg?v=1789048889"}],"url":"https:\/\/thesconcehouse.com\/collections\/uplighters.oembed","provider":"The Sconce House","version":"1.0","type":"link"}