{"title":"Stairwell Lighting","description":"\u003cp\u003eStairs want light low and light high. Low level fittings for the treads, tall statement sconces for a double height void, and brackets shallow enough that nobody clips one on the way down.\u003c\/p\u003e","products":[{"product_id":"atelier-sconce-house-vantage-five-arm-brass-wall-candelabra","title":"Atelier Sconce House Vantage Five Arm Brass Wall Candelabra","description":"\u003cp\u003eFive arms on one backplate, sweeping out and up so the candles sit on an arc rather than a line. Drawn for a dining room where the table is long and the wall is the only place left to put light.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 620mm, width 780mm, projection from the wall 280mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 5 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767040971084,"sku":"SCH-STM-001-AB","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041003852,"sku":"SCH-STM-001-PN","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767041036620,"sku":"SCH-STM-001-BZ","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Vantage_Five_Arm_Brass_Wall_Candelabra.jpg?v=1789047984"},{"product_id":"atelier-sconce-house-vantage-five-arm-brass-wall-candelabra-pair","title":"Atelier Sconce House Vantage Five Arm Brass Wall Candelabra Pair","description":"\u003cp\u003eFive arms on one backplate, sweeping out and up so the candles sit on an arc rather than a line. Drawn for a dining room where the table is long and the wall is the only place left to put light.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 620mm, width 780mm, projection from the wall 280mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 5 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 22.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041102156,"sku":"SCH-STM-002-AB","price":3374.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041134924,"sku":"SCH-STM-002-PN","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767041167692,"sku":"SCH-STM-002-BZ","price":3674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Vantage_Five_Arm_Brass_Wall_Candelabra_Pair.jpg?v=1789048232"},{"product_id":"atelier-sconce-house-westbourne-alabaster-and-bronze-wall-panel","title":"Atelier Sconce House Westbourne Alabaster and Bronze Wall Panel","description":"\u003cp\u003eA panel of book matched alabaster in a cast bronze surround, lit from behind across its whole area. At almost a metre tall it works where a picture would normally hang and does the job of both.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 960mm, width 480mm, projection from the wall 90mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 4 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 22.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041233228,"sku":"SCH-STM-003-AB","price":3299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041265996,"sku":"SCH-STM-003-PN","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767041298764,"sku":"SCH-STM-003-BZ","price":3599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Westbourne_Alabaster_and_Bronze_Wall_Panel.jpg?v=1789048264"},{"product_id":"atelier-sconce-house-xanthe-hand-forged-iron-and-glass-wall-lantern","title":"Atelier Sconce House Xanthe Hand Forged Iron and Glass Wall Lantern","description":"\u003cp\u003eA wall lantern forged from solid iron bar over a coke fire, glazed with hand drawn cylinder glass that still carries the ripple. A metre tall and heavy enough that it needs a real fixing.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 1000mm, width 360mm, projection from the wall 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 3 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 18.5 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041364300,"sku":"SCH-STM-004-AB","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041397068,"sku":"SCH-STM-004-PN","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767041429836,"sku":"SCH-STM-004-BZ","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Xanthe_Hand_Forged_Iron_and_Glass_Wall_Lantern.jpg?v=1789048184"},{"product_id":"atelier-sconce-house-xanthe-hand-forged-iron-and-glass-wall-lantern-pair","title":"Atelier Sconce House Xanthe Hand Forged Iron and Glass Wall Lantern Pair","description":"\u003cp\u003eA wall lantern forged from solid iron bar over a coke fire, glazed with hand drawn cylinder glass that still carries the ripple. A metre tall and heavy enough that it needs a real fixing.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 1000mm, width 360mm, projection from the wall 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 37.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041954124,"sku":"SCH-STM-005-AB","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041986892,"sku":"SCH-STM-005-PN","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042019660,"sku":"SCH-STM-005-BZ","price":3874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Xanthe_Hand_Forged_Iron_and_Glass_Wall_Lantern_Pair.jpg?v=1789048027"},{"product_id":"atelier-sconce-house-yarrow-sculptural-brass-frond-wall-light","title":"Atelier Sconce House Yarrow Sculptural Brass Frond Wall Light","description":"\u003cp\u003eNine brass fronds rising from a single stem, each one hammered and set by hand so the group opens as it climbs. The light sits deep in the middle and lights the fronds from within the group.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 900mm, width 420mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 12.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042085196,"sku":"SCH-STM-006-AB","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042117964,"sku":"SCH-STM-006-PN","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042150732,"sku":"SCH-STM-006-BZ","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Yarrow_Sculptural_Brass_Frond_Wall_Light.jpg?v=1789048096"},{"product_id":"atelier-sconce-house-yarrow-sculptural-brass-frond-wall-light-pair","title":"Atelier Sconce House Yarrow Sculptural Brass Frond Wall Light Pair","description":"\u003cp\u003eNine brass fronds rising from a single stem, each one hammered and set by hand so the group opens as it climbs. The light sits deep in the middle and lights the fronds from within the group.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 900mm, width 420mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 25.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042183500,"sku":"SCH-STM-007-AB","price":3374.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042216268,"sku":"SCH-STM-007-PN","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042249036,"sku":"SCH-STM-007-BZ","price":3674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Yarrow_Sculptural_Brass_Frond_Wall_Light_Pair.jpg?v=1789048098"},{"product_id":"atelier-sconce-house-zennor-double-height-stairwell-sconce","title":"Atelier Sconce House Zennor Double Height Stairwell Sconce","description":"\u003cp\u003eA tall bronze and glass sconce drawn for a stairwell you see from two floors, so the proportions read correctly whether you are above it or below it. Specified in hotels more often than in houses, which tells you something about the scale.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 1400mm, width 300mm, projection from the wall 220mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 4 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 24.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042281804,"sku":"SCH-STM-008-AB","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042314572,"sku":"SCH-STM-008-PN","price":3699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042347340,"sku":"SCH-STM-008-BZ","price":3799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Zennor_Double_Height_Stairwell_Sconce.jpg?v=1789047971"},{"product_id":"atelier-sconce-house-amberley-hotel-corridor-bronze-bracket","title":"Atelier Sconce House Amberley Hotel Corridor Bronze Bracket","description":"\u003cp\u003eA short, wide bronze bracket with a fabric shade, designed for a corridor where the fitting must not catch a shoulder or a housekeeping trolley. Projection is held to 110mm for exactly that reason.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 460mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042412876,"sku":"SCH-STM-009-AB","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042445644,"sku":"SCH-STM-009-PN","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042478412,"sku":"SCH-STM-009-BZ","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Amberley_Hotel_Corridor_Bronze_Bracket.jpg?v=1789048165"},{"product_id":"atelier-sconce-house-amberley-hotel-corridor-bronze-bracket-pair","title":"Atelier Sconce House Amberley Hotel Corridor Bronze Bracket Pair","description":"\u003cp\u003eA short, wide bronze bracket with a fabric shade, designed for a corridor where the fitting must not catch a shoulder or a housekeeping trolley. Projection is held to 110mm for exactly that reason.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 460mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 16.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042543948,"sku":"SCH-STM-010-AB","price":2799.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042576716,"sku":"SCH-STM-010-PN","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042609484,"sku":"SCH-STM-010-BZ","price":3074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Amberley_Hotel_Corridor_Bronze_Bracket_Pair.jpg?v=1789047987"},{"product_id":"atelier-sconce-house-brockenhurst-glass-rod-wall-panel","title":"Atelier Sconce House Brockenhurst Glass Rod Wall Panel","description":"\u003cp\u003eForty hand cut glass rods hung in a bronze frame, close enough to touch each other so the panel reads as one surface. Move past it and the whole thing shifts, which is what it is for.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 800mm, width 400mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 16.5 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042675020,"sku":"SCH-STM-011-AB","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042707788,"sku":"SCH-STM-011-PN","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042740556,"sku":"SCH-STM-011-BZ","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Brockenhurst_Glass_Rod_Wall_Panel.jpg?v=1789047958"},{"product_id":"atelier-sconce-house-brockenhurst-glass-rod-wall-panel-pair","title":"Atelier Sconce House Brockenhurst Glass Rod Wall Panel Pair","description":"\u003cp\u003eForty hand cut glass rods hung in a bronze frame, close enough to touch each other so the panel reads as one surface. Move past it and the whole thing shifts, which is what it is for.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 800mm, width 400mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 33.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042773324,"sku":"SCH-STM-012-AB","price":3524.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042806092,"sku":"SCH-STM-012-PN","price":3724.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042838860,"sku":"SCH-STM-012-BZ","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Brockenhurst_Glass_Rod_Wall_Panel_Pair.jpg?v=1789047961"},{"product_id":"atelier-sconce-house-cranmore-forged-steel-and-parchment-wall-panel","title":"Atelier Sconce House Cranmore Forged Steel and Parchment Wall Panel","description":"\u003cp\u003eA forged steel frame filled with a sheet of goatskin parchment, oiled until it turns the colour of weak tea. Lit from behind it shows every mark the animal made in its life, which is either the point or a reason to buy something else.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 760mm, width 440mm, projection from the wall 100mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 13.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042871628,"sku":"SCH-STM-013-AB","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042904396,"sku":"SCH-STM-013-PN","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042937164,"sku":"SCH-STM-013-BZ","price":2349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Cranmore_Forged_Steel_and_Parchment_Wall_Panel.jpg?v=1789048182"},{"product_id":"atelier-sconce-house-elmore-woven-bronze-mesh-wall-light","title":"Atelier Sconce House Elmore Woven Bronze Mesh Wall Light","description":"\u003cp\u003eA bronze mesh woven on a loom in Yorkshire, tensioned into a bronze frame and lit from the edge. The weave makes the light move as you walk past it, which a flat diffuser never does.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 700mm, width 500mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042969932,"sku":"SCH-STM-014-AB","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767043002700,"sku":"SCH-STM-014-PN","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767043035468,"sku":"SCH-STM-014-BZ","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Elmore_Woven_Bronze_Mesh_Wall_Light.jpg?v=1789047891"},{"product_id":"atelier-sconce-house-elmore-woven-bronze-mesh-wall-light-pair","title":"Atelier Sconce House Elmore Woven Bronze Mesh Wall Light Pair","description":"\u003cp\u003eA bronze mesh woven on a loom in Yorkshire, tensioned into a bronze frame and lit from the edge. The weave makes the light move as you walk past it, which a flat diffuser never does.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 700mm, width 500mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 29.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767043133772,"sku":"SCH-STM-015-AB","price":3524.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767043166540,"sku":"SCH-STM-015-PN","price":3724.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767043199308,"sku":"SCH-STM-015-BZ","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Elmore_Woven_Bronze_Mesh_Wall_Light_Pair.jpg?v=1789047944"},{"product_id":"atelier-sconce-house-fernhurst-blackened-steel-and-opal-glass-wall-column","title":"Atelier Sconce House Fernhurst Blackened Steel and Opal Glass Wall Column","description":"\u003cp\u003eA tall blackened steel column with an opal glass insert running its full height. Drawn for a hotel lift lobby, bought most often for a double height hallway at home.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 1200mm, width 220mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 4 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 17.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767043232076,"sku":"SCH-STM-016-AB","price":2399.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767043264844,"sku":"SCH-STM-016-PN","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767043297612,"sku":"SCH-STM-016-BZ","price":2599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Fernhurst_Blackened_Steel_and_Opal_Glass_Wall_Column.jpg?v=1789047994"},{"product_id":"atelier-sconce-house-denbury-cast-brass-sunburst-wall-light","title":"Atelier Sconce House Denbury Cast Brass Sunburst Wall Light","description":"\u003cp\u003eTwenty four brass rays radiating from a central boss, each one filed and set by hand so the group is never quite symmetrical. Big enough to hold the end wall of a room on its own.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 820mm, width 820mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E27, maximum 60W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 19.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767043330380,"sku":"SCH-STM-017-AB","price":2799.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767043363148,"sku":"SCH-STM-017-PN","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767043395916,"sku":"SCH-STM-017-BZ","price":3049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Denbury_Cast_Brass_Sunburst_Wall_Light.jpg?v=1789047994"},{"product_id":"vetro-bianco-palladio-hand-blown-opal-globe-set-of-4","title":"Vetro Bianco Palladio Hand Blown Opal Globe Set of 4","description":"\u003cp\u003eFour Palladio globes blown in one session, which is the only way to get glass this consistent across a set.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.2 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58767071150412,"sku":"SCH-SET-002-AB","price":3974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767071183180,"sku":"SCH-SET-002-PN","price":3974.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767071215948,"sku":"SCH-SET-002-BZ","price":3974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Palladio_Hand_Blown_Opal_Globe_Set_of_4.jpg?v=1789048685"},{"product_id":"foundry-nine-kelston-cast-bronze-leaf-set-of-4","title":"Foundry Nine Kelston Cast Bronze Leaf Set of 4","description":"\u003cp\u003eFour bronze leaves poured and patinated together, for a dining room or a hotel corridor.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 16.4 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Antique brass","offer_id":58767072002380,"sku":"SCH-SET-003-AB","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767072035148,"sku":"SCH-SET-003-PN","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767072067916,"sku":"SCH-SET-003-BZ","price":3774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Leaf_Set_of_4.jpg?v=1789048173"},{"product_id":"chalkhill-studio-norbury-plaster-shell-set-of-4","title":"Chalkhill Studio Norbury Plaster Shell Set of 4","description":"\u003cp\u003eShell uplighters cast in one batch, for a stairwell or a long gallery wall where you want the wash to be even.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 19.2 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767073313100,"sku":"SCH-SET-004-AB","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767073345868,"sku":"SCH-SET-004-PN","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767073378636,"sku":"SCH-SET-004-BZ","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Set_of_4.jpg?v=1789047946"},{"product_id":"chalkhill-studio-norbury-plaster-shell-set-of-6","title":"Chalkhill Studio Norbury Plaster Shell Set of 6","description":"\u003cp\u003eShell uplighters cast in one batch, for a stairwell or a long gallery wall where you want the wash to be even.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 28.8 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767074591052,"sku":"SCH-SET-005-AB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767074623820,"sku":"SCH-SET-005-PN","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767074656588,"sku":"SCH-SET-005-BZ","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Set_of_6.jpg?v=1789048096"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-set-of-4","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Set of 4","description":"\u003cp\u003eScallops thrown and glazed together, so the glaze breaks the same way on every one.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 20.0 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767076786508,"sku":"SCH-SET-006-AB","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767076819276,"sku":"SCH-SET-006-PN","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767076852044,"sku":"SCH-SET-006-BZ","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Set_of_4.jpg?v=1789048221"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-set-of-6","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Set of 6","description":"\u003cp\u003eScallops thrown and glazed together, so the glaze breaks the same way on every one.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 30.0 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767077048652,"sku":"SCH-SET-007-AB","price":3699.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077081420,"sku":"SCH-SET-007-PN","price":3699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077114188,"sku":"SCH-SET-007-BZ","price":3699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Set_of_6.jpg?v=1789048217"},{"product_id":"chalkhill-studio-pemberley-ceramic-bowl-uplighter-set-of-4","title":"Chalkhill Studio Pemberley Ceramic Bowl Uplighter Set of 4","description":"\u003cp\u003eBowls thrown by one potter in one sitting, which is the only way to get the rim to read the same across a run.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 21.6 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767077146956,"sku":"SCH-SET-008-AB","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077179724,"sku":"SCH-SET-008-PN","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077212492,"sku":"SCH-SET-008-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Ceramic_Bowl_Uplighter_Set_of_4.jpg?v=1789048184"},{"product_id":"chalkhill-studio-pemberley-ceramic-bowl-uplighter-set-of-6","title":"Chalkhill Studio Pemberley Ceramic Bowl Uplighter Set of 6","description":"\u003cp\u003eBowls thrown by one potter in one sitting, which is the only way to get the rim to read the same across a run.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 32.4 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Antique brass","offer_id":58767077245260,"sku":"SCH-SET-009-AB","price":3849.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077278028,"sku":"SCH-SET-009-PN","price":3849.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077310796,"sku":"SCH-SET-009-BZ","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Ceramic_Bowl_Uplighter_Set_of_6.jpg?v=1789048281"},{"product_id":"marlow-and-reade-jesmond-brass-reading-arm-set-of-6","title":"Marlow and Reade Jesmond Brass Reading Arm Set of 6","description":"\u003cp\u003eReading arms for a hotel corridor or a run of guest rooms, all machined in one run so the joints feel the same on every one.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 18.6 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767077736780,"sku":"SCH-SET-011-AB","price":3749.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077769548,"sku":"SCH-SET-011-PN","price":3749.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077802316,"sku":"SCH-SET-011-BZ","price":3749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Jesmond_Brass_Reading_Arm_Set_of_6.jpg?v=1789048606"},{"product_id":"marlow-and-reade-uffington-slimline-picture-light-600mm-set-of-4","title":"Marlow and Reade Uffington Slimline Picture Light 600mm Set of 4","description":"\u003cp\u003eSlimline picture lights for a hang of four, cut from one extrusion so the profile is identical along the wall.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 11.2 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.8 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767077835084,"sku":"SCH-SET-012-AB","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767077867852,"sku":"SCH-SET-012-PN","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767077900620,"sku":"SCH-SET-012-BZ","price":3199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_Picture_Light_600mm_Set_of_4.jpg?v=1789048654"},{"product_id":"marlow-and-reade-turnham-brass-picture-light-450mm-set-of-6","title":"Marlow and Reade Turnham Brass Picture Light 450mm Set of 6","description":"\u003cp\u003ePicture lights from the same LED bin, which is what stops a picture wall looking patchy.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 8 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 12.6 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767078031692,"sku":"SCH-SET-014-AB","price":3749.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767078064460,"sku":"SCH-SET-014-PN","price":3749.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767078097228,"sku":"SCH-SET-014-BZ","price":3749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Brass_Picture_Light_450mm_Set_of_6.jpg?v=1789048757"},{"product_id":"the-sconce-house-collection-ampney-flush-half-lantern","title":"The Sconce House Collection Ampney Flush Half Lantern","description":"\u003cp\u003eA half lantern that projects only 105mm, so a hallway stays a hallway and nobody catches a shoulder on it.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 280mm, width 180mm, projection from the wall 105mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 105mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.9 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767110701388,"sku":"SCH-HAL-001-AB","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767110734156,"sku":"SCH-HAL-001-BK","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767110766924,"sku":"SCH-HAL-001-PN","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767110799692,"sku":"SCH-HAL-001-WH","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Ampney_Flush_Half_Lantern.jpg?v=1789048810"},{"product_id":"the-sconce-house-collection-barnsley-up-and-down-wall-light","title":"The Sconce House Collection Barnsley Up and Down Wall Light","description":"\u003cp\u003eTwo beams, one up the wall and one down it, from one lamp. On a stair it lights the treads below and the ceiling above at the same time.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 220mm, width 100mm, projection from the wall 100mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x G9, maximum 25W each\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 100mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.7 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767110865228,"sku":"SCH-HAL-002-AB","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767110897996,"sku":"SCH-HAL-002-BK","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767110930764,"sku":"SCH-HAL-002-PN","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767110963532,"sku":"SCH-HAL-002-WH","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Barnsley_Up_and_Down_Wall_Light.jpg?v=1789048907"},{"product_id":"the-sconce-house-collection-cropredy-opal-half-moon","title":"The Sconce House Collection Cropredy Opal Half Moon","description":"\u003cp\u003eA pressed opal half moon, the standard hallway fitting done properly: thicker glass, a heavier backplate and no visible screws.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 150mm, width 300mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 110mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.2 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111291212,"sku":"SCH-HAL-003-AB","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111323980,"sku":"SCH-HAL-003-BK","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111356748,"sku":"SCH-HAL-003-PN","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111389516,"sku":"SCH-HAL-003-WH","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Cropredy_Opal_Half_Moon.jpg?v=1789048799"},{"product_id":"the-sconce-house-collection-duntisbourne-brass-wall-lantern","title":"The Sconce House Collection Duntisbourne Brass Wall Lantern","description":"\u003cp\u003eA small six sided lantern for indoors, the hallway version of the porch lantern. Clear glass, so fit a decorative lamp.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 320mm, width 160mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 180mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111422284,"sku":"SCH-HAL-004-AB","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111455052,"sku":"SCH-HAL-004-BK","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111487820,"sku":"SCH-HAL-004-PN","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111520588,"sku":"SCH-HAL-004-WH","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Duntisbourne_Brass_Wall_Lantern.jpg?v=1789048904"},{"product_id":"the-sconce-house-collection-elkstone-ribbed-glass-cylinder","title":"The Sconce House Collection Elkstone Ribbed Glass Cylinder","description":"\u003cp\u003eA ribbed cylinder mounted vertically, which draws the eye up a stairwell rather than across it.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 110mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 130mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.8 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111586124,"sku":"SCH-HAL-005-AB","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111618892,"sku":"SCH-HAL-005-BK","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111651660,"sku":"SCH-HAL-005-PN","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111684428,"sku":"SCH-HAL-005-WH","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Elkstone_Ribbed_Glass_Cylinder.jpg?v=1789048896"},{"product_id":"the-sconce-house-collection-farmington-plaster-uplighter","title":"The Sconce House Collection Farmington Plaster Uplighter","description":"\u003cp\u003eA small plaster uplighter to paint the colour of the wall, so all you see on a landing is the light and not the fitting.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 220mm, width 260mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 120mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.9 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.9 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111717196,"sku":"SCH-HAL-006-AB","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111749964,"sku":"SCH-HAL-006-BK","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111782732,"sku":"SCH-HAL-006-PN","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111815500,"sku":"SCH-HAL-006-WH","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Farmington_Plaster_Uplighter.jpg?v=1789048889"},{"product_id":"the-sconce-house-collection-guiting-twin-candle-wall-bracket","title":"The Sconce House Collection Guiting Twin Candle Wall Bracket","description":"\u003cp\u003eTwo candle arms on a shaped backplate, the fitting a Georgian hallway would have had. Fit low wattage lamps and let it glow.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 340mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 25W each\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 180mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.1 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767111848268,"sku":"SCH-HAL-007-AB","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767111881036,"sku":"SCH-HAL-007-BK","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767111913804,"sku":"SCH-HAL-007-PN","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767111946572,"sku":"SCH-HAL-007-WH","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Guiting_Twin_Candle_Wall_Bracket.jpg?v=1789048886"},{"product_id":"the-sconce-house-collection-hazleton-low-level-stair-light","title":"The Sconce House Collection Hazleton Low Level Stair Light","description":"\u003cp\u003eRecessed at skirting height to wash the treads. Six of these will light a staircase better than anything hung on the wall above it.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 80mm, width 80mm, projection from the wall flush\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: integral warm white LED, 2W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: flush, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 0.5 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767112012108,"sku":"SCH-HAL-008-AB","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767112044876,"sku":"SCH-HAL-008-BK","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767112077644,"sku":"SCH-HAL-008-PN","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767112110412,"sku":"SCH-HAL-008-WH","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Hazleton_Low_Level_Stair_Light.jpg?v=1789048917"},{"product_id":"the-sconce-house-collection-icomb-brass-picture-rail-sconce","title":"The Sconce House Collection Icomb Brass Picture Rail Sconce","description":"\u003cp\u003eSits on the picture rail rather than the wall, so a listed hallway does not need chasing. The clamp is lined with cork.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 240mm, width 150mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 170mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.7 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767112143180,"sku":"SCH-HAL-009-AB","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767112175948,"sku":"SCH-HAL-009-BK","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767112208716,"sku":"SCH-HAL-009-PN","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767112241484,"sku":"SCH-HAL-009-WH","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Icomb_Brass_Picture_Rail_Sconce.jpg?v=1789048856"},{"product_id":"the-sconce-house-collection-kelmscott-arts-and-crafts-copper-sconce","title":"The Sconce House Collection Kelmscott Arts and Crafts Copper Sconce","description":"\u003cp\u003eHammered copper with a slag glass panel, the Cotswold pattern. Warm, heavy and completely at home on a dark stair.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 320mm, width 200mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 160mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.4 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767112274252,"sku":"SCH-HAL-010-AB","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767112307020,"sku":"SCH-HAL-010-BK","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767112339788,"sku":"SCH-HAL-010-PN","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767112372556,"sku":"SCH-HAL-010-WH","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Kelmscott_Arts_and_Crafts_Copper_Sconce.jpg?v=1789048867"},{"product_id":"the-sconce-house-collection-lechlade-slim-led-wall-bar","title":"The Sconce House Collection Lechlade Slim LED Wall Bar","description":"\u003cp\u003eA 500mm bar that grazes the wall from top to bottom. In a narrow hallway it makes the wall the light source and the corridor feel wider.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 500mm, width 35mm, projection from the wall 50mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: integral warm white LED, 10W, CRI 90\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 50mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767112438092,"sku":"SCH-HAL-011-AB","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767112470860,"sku":"SCH-HAL-011-BK","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767112503628,"sku":"SCH-HAL-011-PN","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767112536396,"sku":"SCH-HAL-011-WH","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Lechlade_Slim_LED_Wall_Bar.jpg?v=1789048696"},{"product_id":"the-sconce-house-collection-minster-gothic-arch-wall-light","title":"The Sconce House Collection Minster Gothic Arch Wall Light","description":"\u003cp\u003eAn arched backplate with an opal panel behind it, drawn off a church window. Suits a stone flagged hall and looks silly anywhere else.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 180mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 120mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.0 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767112929612,"sku":"SCH-HAL-012-AB","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767112962380,"sku":"SCH-HAL-012-BK","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767112995148,"sku":"SCH-HAL-012-PN","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767113027916,"sku":"SCH-HAL-012-WH","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Minster_Gothic_Arch_Wall_Light.jpg?v=1789048883"},{"product_id":"the-sconce-house-collection-naunton-pressed-steel-bulkhead","title":"The Sconce House Collection Naunton Pressed Steel Bulkhead","description":"\u003cp\u003eThe bulkhead light off a ship, made in steel rather than aluminium so it has some weight. Cage optional.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 200mm, width 200mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 120mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.0 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767113060684,"sku":"SCH-HAL-013-AB","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767113093452,"sku":"SCH-HAL-013-BK","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767113126220,"sku":"SCH-HAL-013-PN","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767113158988,"sku":"SCH-HAL-013-WH","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Naunton_Pressed_Steel_Bulkhead.jpg?v=1789048836"},{"product_id":"the-sconce-house-collection-oddington-alabaster-effect-resin-half-moon","title":"The Sconce House Collection Oddington Alabaster Effect Resin Half Moon","description":"\u003cp\u003eA cast resin half moon that reads as alabaster from two metres away at a fifth of the price. We are not going to pretend it is stone.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 160mm, width 320mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 110mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767113224524,"sku":"SCH-HAL-014-AB","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767113257292,"sku":"SCH-HAL-014-BK","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767113290060,"sku":"SCH-HAL-014-PN","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767113322828,"sku":"SCH-HAL-014-WH","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Oddington_Alabaster_Effect_Resin_Half_Moon.jpg?v=1789048515"},{"product_id":"the-sconce-house-collection-poulton-swing-arm-hall-light","title":"The Sconce House Collection Poulton Swing Arm Hall Light","description":"\u003cp\u003eA short swing arm for a hall table, so you can push it out of the way when you come in with shopping.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 220mm, width 130mm, projection from the wall 140mm to 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 140mm to 400mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.0 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767113388364,"sku":"SCH-HAL-015-AB","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767113421132,"sku":"SCH-HAL-015-BK","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767113453900,"sku":"SCH-HAL-015-PN","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767113486668,"sku":"SCH-HAL-015-WH","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Poulton_Swing_Arm_Hall_Light.jpg?v=1789048665"},{"product_id":"the-sconce-house-collection-quenington-reeded-brass-half-cylinder","title":"The Sconce House Collection Quenington Reeded Brass Half Cylinder","description":"\u003cp\u003eA reeded brass half cylinder, open top and bottom. Simple, quiet and the one that sells to architects.\u003c\/p\u003e\u003cp\u003eA hallway is the one room in the house that is only ever passed through, so the light in it has to do its work without being looked at. That means shallow projection so nothing is caught by a coat or a shoulder, a wide enough spread that you are not walking through pools of light and dark, and enough output to see a doormat and a set of keys. Everything in this group is held to 180mm projection or less unless the description says otherwise.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 120mm, projection from the wall 90mm\u003c\/li\u003e\n\u003cli\u003eMaterials: steel, brass or glass depending on the fitting\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 25W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round or shaped, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eProjection: 90mm, chosen so it clears a passing shoulder\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRecommended mounting height: 1700mm to 1800mm in a hallway\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.8 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"The Sconce House Collection","offers":[{"title":"Antique brass","offer_id":58767113519436,"sku":"SCH-HAL-016-AB","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Matt black","offer_id":58767113552204,"sku":"SCH-HAL-016-BK","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767113584972,"sku":"SCH-HAL-016-PN","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58767113617740,"sku":"SCH-HAL-016-WH","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/The_Sconce_House_Collection_Quenington_Reeded_Brass_Half_Cylinder.jpg?v=1789048578"}],"url":"https:\/\/thesconcehouse.com\/collections\/stairwell-lighting.oembed?page=2","provider":"The Sconce House","version":"1.0","type":"link"}