{"title":"Sold as a Pair","description":"\u003cp\u003eSconces are rarely convincing on their own. These are supplied as matched pairs, finished together from the same batch so the colour agrees.\u003c\/p\u003e","products":[{"product_id":"vellum-stone-ashcombe-alabaster-half-moon-uplighter-wall-light-pair","title":"Vellum Stone Ashcombe Alabaster Half Moon Uplighter Wall Light Pair","description":"\u003cp\u003eThe half moon is the quietest way to light a wall. The alabaster is cut from a single block, so the veining runs unbroken across the face and the light picks it out as a slow amber drift rather than a pattern.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 180mm, width 300mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766937260364,"sku":"SCH-ALB-002-AB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766937293132,"sku":"SCH-ALB-002-PN","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766937325900,"sku":"SCH-ALB-002-BZ","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Ashcombe_Alabaster_Half_Moon_Uplighter_Wall_Light_Pair.jpg?v=1789048524"},{"product_id":"vellum-stone-bramfield-alabaster-tapered-cylinder-wall-light-pair","title":"Vellum Stone Bramfield Alabaster Tapered Cylinder Wall Light Pair","description":"\u003cp\u003eA tapered cylinder of white alabaster on a slim brass stem. It throws a soft column of light up the wall and a warmer pool down onto whatever sits below it, which is why it works either side of a bed.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 140mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766937555276,"sku":"SCH-ALB-005-AB","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766937588044,"sku":"SCH-ALB-005-PN","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766937620812,"sku":"SCH-ALB-005-BZ","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Bramfield_Alabaster_Tapered_Cylinder_Wall_Light_Pair.jpg?v=1789048842"},{"product_id":"vellum-stone-colwyn-alabaster-backlit-oval-disc-wall-light-pair","title":"Vellum Stone Colwyn Alabaster Backlit Oval Disc Wall Light Pair","description":"\u003cp\u003eA flat oval of cream alabaster set 40mm off the wall on hidden brass standoffs. The lamp sits behind it, so you never see a bulb, only the stone glowing from the inside with a bright halo on the plaster behind.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 320mm, width 220mm, projection from the wall 70mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766937850188,"sku":"SCH-ALB-008-AB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766937882956,"sku":"SCH-ALB-008-PN","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766937915724,"sku":"SCH-ALB-008-BZ","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Colwyn_Alabaster_Backlit_Oval_Disc_Wall_Light_Pair.jpg?v=1789048633"},{"product_id":"vellum-stone-dorney-alabaster-carved-scallop-shell-wall-light-pair","title":"Vellum Stone Dorney Alabaster Carved Scallop Shell Wall Light Pair","description":"\u003cp\u003eA scallop shell carved by hand from honey alabaster, a form that has been used on English walls since the eighteenth century. Every shell is slightly different because the flutes are cut by eye rather than by machine.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 260mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938145100,"sku":"SCH-ALB-011-AB","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938177868,"sku":"SCH-ALB-011-PN","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938210636,"sku":"SCH-ALB-011-BZ","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Dorney_Alabaster_Carved_Scallop_Shell_Wall_Light_Pair.jpg?v=1789048637"},{"product_id":"vellum-stone-eversholt-alabaster-fluted-column-wall-light-pair","title":"Vellum Stone Eversholt Alabaster Fluted Column Wall Light Pair","description":"\u003cp\u003eA fluted column in the classical manner, cut so the flutes deepen towards the base. Lit from within it reads as a soft vertical stripe, which suits a tall hallway or the flank of a chimney breast.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 150mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938341708,"sku":"SCH-ALB-013-AB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938374476,"sku":"SCH-ALB-013-PN","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938407244,"sku":"SCH-ALB-013-BZ","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Eversholt_Alabaster_Fluted_Column_Wall_Light_Pair.jpg?v=1789048682"},{"product_id":"vellum-stone-fenwick-alabaster-bowl-uplighter-on-a-brass-arm-wall-light-pair","title":"Vellum Stone Fenwick Alabaster Bowl Uplighter on a Brass Arm Wall Light Pair","description":"\u003cp\u003eA shallow alabaster bowl carried on a cast brass arm that curves away from the wall. The bowl throws almost all of its light at the ceiling, so a pair will lift a low room without anything glaring at eye level.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 240mm, width 280mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938636620,"sku":"SCH-ALB-016-AB","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938669388,"sku":"SCH-ALB-016-PN","price":2399.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938702156,"sku":"SCH-ALB-016-BZ","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Fenwick_Alabaster_Bowl_Uplighter_on_a_Brass_Arm_Wall_Light_Pair.jpg?v=1789048701"},{"product_id":"vellum-stone-grantley-alabaster-edge-lit-rectangular-slab-wall-light-pair","title":"Vellum Stone Grantley Alabaster Edge Lit Rectangular Slab Wall Light Pair","description":"\u003cp\u003eA rectangular slab of pale alabaster lit along its top and bottom edges by two concealed strips. The stone lights evenly from the inside with no hot spot, which is difficult to achieve and the reason this one takes longest to make.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 400mm, width 180mm, projection from the wall 80mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 12.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766938865996,"sku":"SCH-ALB-018-AB","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766938898764,"sku":"SCH-ALB-018-PN","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766938931532,"sku":"SCH-ALB-018-BZ","price":2774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Grantley_Alabaster_Edge_Lit_Rectangular_Slab_Wall_Light_Pair.jpg?v=1789048682"},{"product_id":"vellum-stone-hindon-alabaster-twin-arm-with-two-shades-wall-light-pair","title":"Vellum Stone Hindon Alabaster Twin Arm with Two Shades Wall Light Pair","description":"\u003cp\u003eTwo alabaster shades on a single cast brass backplate, arms sweeping out in opposite directions. It covers a wide span from one wiring point, which makes it the sensible answer above a wide headboard or a mantelpiece.\u003c\/p\u003e\u003cp\u003eAlabaster is a gypsum stone, soft enough to carve and just translucent enough to hold light without turning it milky. Each piece is cut, turned and hand finished in our Wiltshire workshop, then waxed rather than lacquered so the surface keeps a little of its natural chalk. Expect variation between blocks. That is the point of the material and not a fault. Sold as a matched pair, cut from the same block so the veining reads as a set.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 540mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand carved alabaster with a cast brass frame and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: alabaster waxed and unlacquered, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 120mm diameter, covers most old fixing holes\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks, each piece carved to order\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vellum Stone","offers":[{"title":"Antique brass","offer_id":58766939554124,"sku":"SCH-ALB-020-AB","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766939586892,"sku":"SCH-ALB-020-PN","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766939619660,"sku":"SCH-ALB-020-BZ","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vellum_Stone_Hindon_Alabaster_Twin_Arm_with_Two_Shades_Wall_Light_Pair.jpg?v=1789048587"},{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light-pair","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light Pair","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766939947340,"sku":"SCH-BRZ-002-MB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766939980108,"sku":"SCH-BRZ-002-DB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766940012876,"sku":"SCH-BRZ-002-LA","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light_Pair.jpg?v=1789048066"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-pair","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Pair","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766949318988,"sku":"SCH-BRZ-008-MB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766949351756,"sku":"SCH-BRZ-008-DB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766949384524,"sku":"SCH-BRZ-008-LA","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Pair.jpg?v=1789048287"},{"product_id":"foundry-nine-mendip-cast-bronze-knot-bracket-wall-light-pair","title":"Foundry Nine Mendip Cast Bronze Knot Bracket Wall Light Pair","description":"\u003cp\u003eA length of bronze rope tied in a wall knot, cast from a real hemp original so the lay of the strands survives in the metal. It suits a panelled room or a boot room where a delicate fitting would look out of place.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 200mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766953513292,"sku":"SCH-BRZ-011-MB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766953546060,"sku":"SCH-BRZ-011-DB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766953578828,"sku":"SCH-BRZ-011-LA","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Mendip_Cast_Bronze_Knot_Bracket_Wall_Light_Pair.jpg?v=1789048275"},{"product_id":"foundry-nine-netherby-cast-bronze-bronze-arm-with-a-stitched-leather-shade-wall-light-pair","title":"Foundry Nine Netherby Cast Bronze Bronze Arm with a Stitched Leather Shade Wall Light Pair","description":"\u003cp\u003eA plain bronze arm with a shade of vegetable tanned leather, saddle stitched by hand along the seam. The leather darkens with use and with the heat of the lamp, which is the whole idea.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 310mm, width 230mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, vegetable tanned leather shade\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766960820556,"sku":"SCH-BRZ-014-MB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766960853324,"sku":"SCH-BRZ-014-DB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766960886092,"sku":"SCH-BRZ-014-LA","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Netherby_Cast_Bronze_Bronze_Arm_with_a_Stitched_Leather_Shade_Wall_Light_Pair.jpg?v=1789048081"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light-pair","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light Pair","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766965277004,"sku":"SCH-BRZ-017-MB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766965309772,"sku":"SCH-BRZ-017-DB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766965342540,"sku":"SCH-BRZ-017-LA","price":2974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light_Pair.jpg?v=1789047974"},{"product_id":"vetro-bianco-palladio-hand-blown-glass-opal-globe-on-brass-wall-light-pair","title":"Vetro Bianco Palladio Hand Blown Glass Opal Globe on Brass Wall Light Pair","description":"\u003cp\u003eA hand blown opal globe held in a brass ring. Opal glass is blown in two layers, a white gather inside a clear one, and that is what stops the lamp showing as a bright point through the wall of the globe.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 230mm, width 230mm, projection from the wall 250mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766969700684,"sku":"SCH-GLS-002-AB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766969733452,"sku":"SCH-GLS-002-PB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766969766220,"sku":"SCH-GLS-002-PN","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766969798988,"sku":"SCH-GLS-002-BZ","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Palladio_Hand_Blown_Glass_Opal_Globe_on_Brass_Wall_Light_Pair.jpg?v=1789048639"},{"product_id":"vetro-bianco-querini-hand-blown-glass-fluted-rigadin-cylinder-wall-light-pair","title":"Vetro Bianco Querini Hand Blown Glass Fluted Rigadin Cylinder Wall Light Pair","description":"\u003cp\u003eA cylinder blown into a rigadin mould, which puts a fine vertical rib the whole way round. The ribs break the light into narrow lines, so the fitting reads as a soft sparkle rather than a single bright shape.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 280mm, width 150mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766974091596,"sku":"SCH-GLS-005-AB","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766974124364,"sku":"SCH-GLS-005-PB","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766974157132,"sku":"SCH-GLS-005-PN","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766974189900,"sku":"SCH-GLS-005-BZ","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Querini_Hand_Blown_Glass_Fluted_Rigadin_Cylinder_Wall_Light_Pair.jpg?v=1789048686"},{"product_id":"vetro-bianco-rialto-hand-blown-glass-bubble-glass-disc-wall-light-pair","title":"Vetro Bianco Rialto Hand Blown Glass Bubble Glass Disc Wall Light Pair","description":"\u003cp\u003eA flat disc of glass with air deliberately trapped in it, the bubbles set in rows by pressing the gather onto a bed of spikes before the second layer goes on. A Murano trick and still the prettiest way to hold light in flat glass.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 300mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766978941260,"sku":"SCH-GLS-008-AB","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766978974028,"sku":"SCH-GLS-008-PB","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766979006796,"sku":"SCH-GLS-008-PN","price":2399.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766979039564,"sku":"SCH-GLS-008-BZ","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Rialto_Hand_Blown_Glass_Bubble_Glass_Disc_Wall_Light_Pair.jpg?v=1789048931"},{"product_id":"vetro-bianco-sansovino-hand-blown-glass-twisted-glass-column-wall-light-pair","title":"Vetro Bianco Sansovino Hand Blown Glass Twisted Glass Column Wall Light Pair","description":"\u003cp\u003eA column of clear glass twisted while still hot, so the whole body turns through about a hundred degrees from base to top. The twist carries the light up the fitting and throws a slow spiral onto the wall behind.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 130mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766984118604,"sku":"SCH-GLS-011-AB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766984151372,"sku":"SCH-GLS-011-PB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766984184140,"sku":"SCH-GLS-011-PN","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766984216908,"sku":"SCH-GLS-011-BZ","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Sansovino_Hand_Blown_Glass_Twisted_Glass_Column_Wall_Light_Pair.jpg?v=1789048891"},{"product_id":"vetro-bianco-torcello-hand-blown-glass-smoked-amber-shade-wall-light-pair","title":"Vetro Bianco Torcello Hand Blown Glass Smoked Amber Shade Wall Light Pair","description":"\u003cp\u003eA conical shade in smoked amber, the colour laid in as a thin flash over clear glass so it darkens towards the rim. It takes the edge off a bright lamp and warms a cold north facing room.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 210mm, width 220mm, projection from the wall 240mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766988673356,"sku":"SCH-GLS-014-AB","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766988706124,"sku":"SCH-GLS-014-PB","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766988738892,"sku":"SCH-GLS-014-PN","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766988771660,"sku":"SCH-GLS-014-BZ","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Torcello_Hand_Blown_Glass_Smoked_Amber_Shade_Wall_Light_Pair.jpg?v=1789048688"},{"product_id":"vetro-bianco-vendramin-hand-blown-glass-clear-glass-lantern-on-a-brass-arm-wall-light-pair","title":"Vetro Bianco Vendramin Hand Blown Glass Clear Glass Lantern on a Brass Arm Wall Light Pair","description":"\u003cp\u003eA six sided lantern in clear glass carried on a brass arm that stands well off the wall. Because the glass is clear you see the lamp, so fit a decorative filament LED and let it be the ornament.\u003c\/p\u003e\u003cp\u003eBlown by mouth on the Venetian lagoon by a workshop we have bought from for years. Nothing is pressed and nothing is moulded except where the pattern needs a mould, so no two pieces are identical in wall thickness or in the exact set of the shoulder. Brass parts are made in England and the two are married here. Sold as a pair, blown in the same session by the same maker.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 400mm, width 200mm, projection from the wall 290mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand blown glass with solid brass fittings and backplate\u003c\/li\u003e\n\u003cli\u003eFinish: glass as described, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 100mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 5 weeks from Murano\u003c\/li\u003e\n\u003cli\u003eSmall bubbles and slight variation in the glass are evidence of hand blowing and are not faults\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 12.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Vetro Bianco","offers":[{"title":"Antique brass","offer_id":58766994178380,"sku":"SCH-GLS-017-AB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58766994211148,"sku":"SCH-GLS-017-PB","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766994243916,"sku":"SCH-GLS-017-PN","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766994276684,"sku":"SCH-GLS-017-BZ","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Vetro_Bianco_Vendramin_Hand_Blown_Glass_Clear_Glass_Lantern_on_a_Brass_Arm_Wall_Light_Pair.jpg?v=1789048596"},{"product_id":"halliwell-crystal-adelaide-cut-crystal-drop-wall-light-pair","title":"Halliwell Crystal Adelaide Cut Crystal Drop Wall Light Pair","description":"\u003cp\u003eThree tiers of hand cut drops hung from a polished brass frame. The cuts are deep enough to split the light properly, so the fitting throws small spectra onto the wall either side of it.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 200mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58766998896972,"sku":"SCH-CRY-002-AB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766998929740,"sku":"SCH-CRY-002-PN","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766998962508,"sku":"SCH-CRY-002-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Adelaide_Cut_Crystal_Drop_Wall_Light_Pair.jpg?v=1789047863"},{"product_id":"halliwell-crystal-berkeley-crystal-candle-bracket-with-pendalogues-wall-light-pair","title":"Halliwell Crystal Berkeley Crystal Candle Bracket with Pendalogues Wall Light Pair","description":"\u003cp\u003eA single candle arm hung with pendalogue drops, the long almond shaped crystals used on Georgian chandeliers. Hang it where a door will move the air and it never quite stands still.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767004238156,"sku":"SCH-CRY-005-AB","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767004270924,"sku":"SCH-CRY-005-PN","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767004303692,"sku":"SCH-CRY-005-BZ","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Berkeley_Crystal_Candle_Bracket_with_Pendalogues_Wall_Light_Pair.jpg?v=1789048098"},{"product_id":"halliwell-crystal-clarence-crystal-and-brass-twin-arm-wall-light-pair","title":"Halliwell Crystal Clarence Crystal and Brass Twin Arm Wall Light Pair","description":"\u003cp\u003eTwo arms rising from a brass backplate, each carrying a cut crystal bobeche and a candle tube. Substantial without being heavy handed, which is a hard balance in crystal.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 360mm, width 420mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 12.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767008792908,"sku":"SCH-CRY-008-AB","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767008825676,"sku":"SCH-CRY-008-PN","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767008858444,"sku":"SCH-CRY-008-BZ","price":2999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Clarence_Crystal_and_Brass_Twin_Arm_Wall_Light_Pair.jpg?v=1789048005"},{"product_id":"halliwell-crystal-devonshire-crystal-column-sconce-wall-light-pair","title":"Halliwell Crystal Devonshire Crystal Column Sconce Wall Light Pair","description":"\u003cp\u003eA solid crystal column, ground and polished on six faces, lit from a concealed lamp in the brass foot. The light travels up inside the crystal and comes out of the top face as a bright point.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 120mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767011709260,"sku":"SCH-CRY-011-AB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767011742028,"sku":"SCH-CRY-011-PN","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767011774796,"sku":"SCH-CRY-011-BZ","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Devonshire_Crystal_Column_Sconce_Wall_Light_Pair.jpg?v=1789048045"},{"product_id":"halliwell-crystal-egerton-crystal-fan-wall-light-wall-light-pair","title":"Halliwell Crystal Egerton Crystal Fan Wall Light Wall Light Pair","description":"\u003cp\u003eA fan of graduated crystal spears set into a brass mount, an Art Deco shape that has been made in England since the nineteen thirties. It suits a stair half landing where you see it from below.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 400mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767012888908,"sku":"SCH-CRY-013-AB","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767012921676,"sku":"SCH-CRY-013-PN","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767012954444,"sku":"SCH-CRY-013-BZ","price":2774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Egerton_Crystal_Fan_Wall_Light_Wall_Light_Pair.jpg?v=1789047953"},{"product_id":"halliwell-crystal-fitzroy-crystal-and-antique-mirror-plate-wall-light-pair","title":"Halliwell Crystal Fitzroy Crystal and Antique Mirror Plate Wall Light Pair","description":"\u003cp\u003eCrystal drops in front of a hand silvered mirror plate, so every drop is doubled and the fitting reads twice as full as it is. The mirror is antiqued by hand and no two plates foxes the same way.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 460mm, width 260mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 15.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767013904716,"sku":"SCH-CRY-016-AB","price":3224.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767013937484,"sku":"SCH-CRY-016-PN","price":3424.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767013970252,"sku":"SCH-CRY-016-BZ","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Fitzroy_Crystal_and_Antique_Mirror_Plate_Wall_Light_Pair.jpg?v=1789048046"},{"product_id":"marlow-and-reade-hollis-solid-brass-swing-arm-with-a-linen-shade-wall-light-pair","title":"Marlow and Reade Hollis Solid Brass Swing Arm with a Linen Shade Wall Light Pair","description":"\u003cp\u003eA single jointed swing arm with a hand rolled linen shade. The joint is a brass friction knuckle you tighten with a coin, so the arm stays exactly where you put it instead of drifting down over a month.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 180mm to 520mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a hand rolled linen shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 180mm to 520mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014166860,"sku":"SCH-SWG-002-AB","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014199628,"sku":"SCH-SWG-002-PB","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014232396,"sku":"SCH-SWG-002-PN","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014265164,"sku":"SCH-SWG-002-BZ","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Hollis_Solid_Brass_Swing_Arm_with_a_Linen_Shade_Wall_Light_Pair.jpg?v=1789048363"},{"product_id":"marlow-and-reade-ingleby-solid-brass-double-jointed-library-arm-wall-light-pair","title":"Marlow and Reade Ingleby Solid Brass Double Jointed Library Arm Wall Light Pair","description":"\u003cp\u003eTwo joints and a longer reach, the arm a library would have fitted over a reading chair. It folds flat to 150mm when you are not using it and pulls out to almost three quarters of a metre when you are.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 160mm, projection from the wall 150mm to 740mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 150mm to 740mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014560076,"sku":"SCH-SWG-005-AB","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014592844,"sku":"SCH-SWG-005-PB","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014625612,"sku":"SCH-SWG-005-PN","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014658380,"sku":"SCH-SWG-005-BZ","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Ingleby_Solid_Brass_Double_Jointed_Library_Arm_Wall_Light_Pair.jpg?v=1789048688"},{"product_id":"marlow-and-reade-jesmond-solid-brass-reading-arm-with-a-metal-cone-shade-wall-light-pair","title":"Marlow and Reade Jesmond Solid Brass Reading Arm with a Metal Cone Shade Wall Light Pair","description":"\u003cp\u003eA spun brass cone on an adjustable arm, the shade deep enough to keep the lamp out of the eye of anyone lying down. This is the one people buy for a bedside when they read and their partner does not.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 150mm, projection from the wall 170mm to 480mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 170mm to 480mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014986060,"sku":"SCH-SWG-008-AB","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767015018828,"sku":"SCH-SWG-008-PB","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767015051596,"sku":"SCH-SWG-008-PN","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767015084364,"sku":"SCH-SWG-008-BZ","price":1424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Jesmond_Solid_Brass_Reading_Arm_with_a_Metal_Cone_Shade_Wall_Light_Pair.jpg?v=1789048649"},{"product_id":"marlow-and-reade-kelmarsh-solid-brass-articulated-arm-with-a-counterweight-wall-light-pair","title":"Marlow and Reade Kelmarsh Solid Brass Articulated Arm with a Counterweight Wall Light Pair","description":"\u003cp\u003eAn articulated arm balanced by a solid brass counterweight, the drawing office pattern. The balance means you move it with one finger and it stays put, which no friction joint quite manages.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 200mm, projection from the wall 220mm to 900mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 220mm to 900mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 13.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767016788300,"sku":"SCH-SWG-011-AB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767016821068,"sku":"SCH-SWG-011-PB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767016853836,"sku":"SCH-SWG-011-PN","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767016886604,"sku":"SCH-SWG-011-BZ","price":2499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Kelmarsh_Solid_Brass_Articulated_Arm_with_a_Counterweight_Wall_Light_Pair.jpg?v=1789048705"},{"product_id":"marlow-and-reade-lambourne-solid-brass-gooseneck-with-milk-glass-wall-light-pair","title":"Marlow and Reade Lambourne Solid Brass Gooseneck with Milk Glass Wall Light Pair","description":"\u003cp\u003eA heavy gooseneck in solid brass with a milk glass shade screwed into a brass gallery. The gooseneck holds any position you bend it into and will keep doing so for decades because the tube is thick walled.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 180mm, projection from the wall 300mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a milk glass shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 300mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767019082060,"sku":"SCH-SWG-014-AB","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767019114828,"sku":"SCH-SWG-014-PB","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767019147596,"sku":"SCH-SWG-014-PN","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767019180364,"sku":"SCH-SWG-014-BZ","price":1724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Lambourne_Solid_Brass_Gooseneck_with_Milk_Glass_Wall_Light_Pair.jpg?v=1789048706"},{"product_id":"marlow-and-reade-milbourne-solid-brass-heavy-bracket-with-rise-and-fall-wall-light-pair","title":"Marlow and Reade Milbourne Solid Brass Heavy Bracket with Rise and Fall Wall Light Pair","description":"\u003cp\u003eA wall bracket with a rise and fall movement in the column, so the head travels 250mm vertically. It was drawn for a kitchen over a worktop and turns out to be just as useful over a desk.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold as a pair for either side of a bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 520mm, width 220mm, projection from the wall 340mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 340mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 15.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767020884300,"sku":"SCH-SWG-017-AB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767020917068,"sku":"SCH-SWG-017-PB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767020949836,"sku":"SCH-SWG-017-PN","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767020982604,"sku":"SCH-SWG-017-BZ","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Milbourne_Solid_Brass_Heavy_Bracket_with_Rise_and_Fall_Wall_Light_Pair.jpg?v=1789048548"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-pair","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Pair","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022489932,"sku":"SCH-PLS-002-WH","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022522700,"sku":"SCH-PLS-002-ST","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022555468,"sku":"SCH-PLS-002-CH","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Pair.jpg?v=1789047984"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light-pair","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light Pair","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 220mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767024423244,"sku":"SCH-PLS-005-WH","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767024456012,"sku":"SCH-PLS-005-ST","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767024488780,"sku":"SCH-PLS-005-CH","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light_Pair.jpg?v=1789048162"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light-pair","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light Pair","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767026323788,"sku":"SCH-PLS-008-DW","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767026356556,"sku":"SCH-PLS-008-OM","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767026389324,"sku":"SCH-PLS-008-SB","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light_Pair.jpg?v=1789047964"},{"product_id":"chalkhill-studio-quenby-plaster-column-with-a-flared-top-wall-light-pair","title":"Chalkhill Studio Quenby Plaster Column with a Flared Top Wall Light Pair","description":"\u003cp\u003eA tall plaster column that flares at the head, throwing most of its light at the ceiling and a thin wash down the wall. Good in a stairwell where the ceiling is the surface worth lighting.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 520mm, width 180mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 13.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767028191564,"sku":"SCH-PLS-011-WH","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767028224332,"sku":"SCH-PLS-011-ST","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767028257100,"sku":"SCH-PLS-011-CH","price":1424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Quenby_Plaster_Column_with_a_Flared_Top_Wall_Light_Pair.jpg?v=1789047987"},{"product_id":"chalkhill-studio-rushmore-sculptural-plaster-wave-wall-light-pair","title":"Chalkhill Studio Rushmore Sculptural Plaster Wave Wall Light Pair","description":"\u003cp\u003eA wave form modelled by hand in the studio rather than drawn on a screen, so the curve changes section as it rises. Reads as a piece of sculpture in daylight and as a soft glow at night.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 440mm, width 300mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767029797196,"sku":"SCH-PLS-014-WH","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767029829964,"sku":"SCH-PLS-014-ST","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767029862732,"sku":"SCH-PLS-014-CH","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Rushmore_Sculptural_Plaster_Wave_Wall_Light_Pair.jpg?v=1789047911"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light-pair","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light Pair","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 320mm, width 280mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767031337292,"sku":"SCH-PLS-017-DW","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767031370060,"sku":"SCH-PLS-017-OM","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767031402828,"sku":"SCH-PLS-017-SB","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light_Pair.jpg?v=1789048068"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-600mm-pair","title":"Marlow and Reade Turnham Traditional Brass Picture Light 600mm Pair","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 110mm, width 600mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 700mm to 950mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767034155340,"sku":"SCH-PIC-004-AB","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767034188108,"sku":"SCH-PIC-004-PB","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767034220876,"sku":"SCH-PIC-004-PN","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767034253644,"sku":"SCH-PIC-004-BZ","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_600mm_Pair.jpg?v=1789048798"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-750mm-pair","title":"Marlow and Reade Turnham Traditional Brass Picture Light 750mm Pair","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 110mm, width 750mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 950mm to 1200mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767035269452,"sku":"SCH-PIC-006-AB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767035302220,"sku":"SCH-PIC-006-PB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767035334988,"sku":"SCH-PIC-006-PN","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767035367756,"sku":"SCH-PIC-006-BZ","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_750mm_Pair.jpg?v=1789048797"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-900mm-pair","title":"Marlow and Reade Turnham Traditional Brass Picture Light 900mm Pair","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 110mm, width 900mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 1200mm to 1500mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767036875084,"sku":"SCH-PIC-008-AB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767036907852,"sku":"SCH-PIC-008-PB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767036940620,"sku":"SCH-PIC-008-PN","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767036973388,"sku":"SCH-PIC-008-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_900mm_Pair.jpg?v=1789048556"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-1200mm-pair","title":"Marlow and Reade Turnham Traditional Brass Picture Light 1200mm Pair","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 110mm, width 1200mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures over 1500mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767037989196,"sku":"SCH-PIC-010-AB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767038021964,"sku":"SCH-PIC-010-PB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767038054732,"sku":"SCH-PIC-010-PN","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767038087500,"sku":"SCH-PIC-010-BZ","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_1200mm_Pair.jpg?v=1789048795"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-600mm-pair","title":"Marlow and Reade Uffington Slimline LED Picture Light 600mm Pair","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 45mm, width 600mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 700mm to 950mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767040020812,"sku":"SCH-PIC-014-AB","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767040053580,"sku":"SCH-PIC-014-PB","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767040086348,"sku":"SCH-PIC-014-PN","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767040119116,"sku":"SCH-PIC-014-BZ","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_600mm_Pair.jpg?v=1789048504"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-750mm-pair","title":"Marlow and Reade Uffington Slimline LED Picture Light 750mm Pair","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 45mm, width 750mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 950mm to 1200mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767040315724,"sku":"SCH-PIC-016-AB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767040348492,"sku":"SCH-PIC-016-PB","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767040381260,"sku":"SCH-PIC-016-PN","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767040414028,"sku":"SCH-PIC-016-BZ","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_750mm_Pair.jpg?v=1789048504"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-900mm-pair","title":"Marlow and Reade Uffington Slimline LED Picture Light 900mm Pair","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 45mm, width 900mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 1200mm to 1500mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767040577868,"sku":"SCH-PIC-018-AB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767040610636,"sku":"SCH-PIC-018-PB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767040643404,"sku":"SCH-PIC-018-PN","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767040676172,"sku":"SCH-PIC-018-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_900mm_Pair.jpg?v=1789048504"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-1200mm-pair","title":"Marlow and Reade Uffington Slimline LED Picture Light 1200mm Pair","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold as a pair from the same LED bin, so two pictures hung side by side are lit at the same colour temperature.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 45mm, width 1200mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures over 1500mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767040840012,"sku":"SCH-PIC-020-AB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767040872780,"sku":"SCH-PIC-020-PB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767040905548,"sku":"SCH-PIC-020-PN","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767040938316,"sku":"SCH-PIC-020-BZ","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_1200mm_Pair.jpg?v=1789048611"},{"product_id":"atelier-sconce-house-vantage-five-arm-brass-wall-candelabra-pair","title":"Atelier Sconce House Vantage Five Arm Brass Wall Candelabra Pair","description":"\u003cp\u003eFive arms on one backplate, sweeping out and up so the candles sit on an arc rather than a line. Drawn for a dining room where the table is long and the wall is the only place left to put light.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 620mm, width 780mm, projection from the wall 280mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 5 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 22.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041102156,"sku":"SCH-STM-002-AB","price":3374.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041134924,"sku":"SCH-STM-002-PN","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767041167692,"sku":"SCH-STM-002-BZ","price":3674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Vantage_Five_Arm_Brass_Wall_Candelabra_Pair.jpg?v=1789048232"},{"product_id":"atelier-sconce-house-xanthe-hand-forged-iron-and-glass-wall-lantern-pair","title":"Atelier Sconce House Xanthe Hand Forged Iron and Glass Wall Lantern Pair","description":"\u003cp\u003eA wall lantern forged from solid iron bar over a coke fire, glazed with hand drawn cylinder glass that still carries the ripple. A metre tall and heavy enough that it needs a real fixing.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 1000mm, width 360mm, projection from the wall 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 37.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767041954124,"sku":"SCH-STM-005-AB","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767041986892,"sku":"SCH-STM-005-PN","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042019660,"sku":"SCH-STM-005-BZ","price":3874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Xanthe_Hand_Forged_Iron_and_Glass_Wall_Lantern_Pair.jpg?v=1789048027"},{"product_id":"atelier-sconce-house-yarrow-sculptural-brass-frond-wall-light-pair","title":"Atelier Sconce House Yarrow Sculptural Brass Frond Wall Light Pair","description":"\u003cp\u003eNine brass fronds rising from a single stem, each one hammered and set by hand so the group opens as it climbs. The light sits deep in the middle and lights the fronds from within the group.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 900mm, width 420mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 25.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042183500,"sku":"SCH-STM-007-AB","price":3374.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042216268,"sku":"SCH-STM-007-PN","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042249036,"sku":"SCH-STM-007-BZ","price":3674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Yarrow_Sculptural_Brass_Frond_Wall_Light_Pair.jpg?v=1789048098"},{"product_id":"atelier-sconce-house-amberley-hotel-corridor-bronze-bracket-pair","title":"Atelier Sconce House Amberley Hotel Corridor Bronze Bracket Pair","description":"\u003cp\u003eA short, wide bronze bracket with a fabric shade, designed for a corridor where the fitting must not catch a shoulder or a housekeeping trolley. Projection is held to 110mm for exactly that reason.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 460mm, projection from the wall 110mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 16.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042543948,"sku":"SCH-STM-010-AB","price":2799.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042576716,"sku":"SCH-STM-010-PN","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042609484,"sku":"SCH-STM-010-BZ","price":3074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Amberley_Hotel_Corridor_Bronze_Bracket_Pair.jpg?v=1789047987"},{"product_id":"atelier-sconce-house-brockenhurst-glass-rod-wall-panel-pair","title":"Atelier Sconce House Brockenhurst Glass Rod Wall Panel Pair","description":"\u003cp\u003eForty hand cut glass rods hung in a bronze frame, close enough to touch each other so the panel reads as one surface. Move past it and the whole thing shifts, which is what it is for.\u003c\/p\u003e\u003cp\u003eMade in our own workshop in England, one at a time, by the people who drew it. Pieces at this scale are built around a welded steel armature so nothing relies on the decorative metal for strength, and every one is wired with silicone insulated cable and a ceramic lampholder because the heat inside a large fitting is not the same as the heat inside a small one. Sold as a pair, made together and finished together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 800mm, width 400mm, projection from the wall 120mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass, bronze, iron and glass depending on the piece, on a welded steel armature\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied and sealed, specify a bespoke finish if you need to match existing metalwork\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 3 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed mounting plate with four M8 fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 8 to 12 weeks\u003c\/li\u003e\n\u003cli\u003eContract and hospitality specification available on request\u003c\/li\u003e\n\u003cli\u003eFull photometric data supplied on request\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 33.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. At this weight the fixing must go into structure. We will send the mounting drawing to your electrician before delivery if you ask.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Antique brass","offer_id":58767042773324,"sku":"SCH-STM-012-AB","price":3524.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767042806092,"sku":"SCH-STM-012-PN","price":3724.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767042838860,"sku":"SCH-STM-012-BZ","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Brockenhurst_Glass_Rod_Wall_Panel_Pair.jpg?v=1789047961"}],"url":"https:\/\/thesconcehouse.com\/collections\/sold-as-a-pair.oembed?page=2","provider":"The Sconce House","version":"1.0","type":"link"}