{"title":"Hallway and Landing","description":"\u003cp\u003eHallways and landings are passed through more than they are sat in, so the light needs to be even, kind and at a height that clears a shoulder. Shallow projections, flush half lanterns and swing arms that fold back.\u003c\/p\u003e","products":[{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766939652428,"sku":"SCH-BRZ-001-MB","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766939685196,"sku":"SCH-BRZ-001-DB","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766939717964,"sku":"SCH-BRZ-001-LA","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light.jpg?v=1789048065"},{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light-pair","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light Pair","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766939947340,"sku":"SCH-BRZ-002-MB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766939980108,"sku":"SCH-BRZ-002-DB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766940012876,"sku":"SCH-BRZ-002-LA","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light_Pair.jpg?v=1789048066"},{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light-antique-verdigris","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light Antique Verdigris","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766941389132,"sku":"SCH-BRZ-003-VG","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766941421900,"sku":"SCH-BRZ-003-DV","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light_Antique_Verdigris.jpg?v=1789048071"},{"product_id":"foundry-nine-kelston-cast-bronze-hand-modelled-leaf-wall-light","title":"Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light","description":"\u003cp\u003eA single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 290mm, width 160mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766943125836,"sku":"SCH-BRZ-004-MB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766943158604,"sku":"SCH-BRZ-004-DB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766943191372,"sku":"SCH-BRZ-004-LA","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Hand_Modelled_Leaf_Wall_Light.jpg?v=1789048268"},{"product_id":"foundry-nine-kelston-cast-bronze-hand-modelled-leaf-wall-light-antique-verdigris","title":"Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light Antique Verdigris","description":"\u003cp\u003eA single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 290mm, width 160mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766946042188,"sku":"SCH-BRZ-006-VG","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766946074956,"sku":"SCH-BRZ-006-DV","price":1174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Hand_Modelled_Leaf_Wall_Light_Antique_Verdigris.jpg?v=1789048275"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766947516748,"sku":"SCH-BRZ-007-MB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766947549516,"sku":"SCH-BRZ-007-DB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766947582284,"sku":"SCH-BRZ-007-LA","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light.jpg?v=1789048210"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-pair","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Pair","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766949318988,"sku":"SCH-BRZ-008-MB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766949351756,"sku":"SCH-BRZ-008-DB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766949384524,"sku":"SCH-BRZ-008-LA","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Pair.jpg?v=1789048287"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-antique-verdigris","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Antique Verdigris","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766951285068,"sku":"SCH-BRZ-009-VG","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766951317836,"sku":"SCH-BRZ-009-DV","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Antique_Verdigris.jpg?v=1789048096"},{"product_id":"foundry-nine-mendip-cast-bronze-knot-bracket-wall-light-pair","title":"Foundry Nine Mendip Cast Bronze Knot Bracket Wall Light Pair","description":"\u003cp\u003eA length of bronze rope tied in a wall knot, cast from a real hemp original so the lay of the strands survives in the metal. It suits a panelled room or a boot room where a delicate fitting would look out of place.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 200mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766953513292,"sku":"SCH-BRZ-011-MB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766953546060,"sku":"SCH-BRZ-011-DB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766953578828,"sku":"SCH-BRZ-011-LA","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Mendip_Cast_Bronze_Knot_Bracket_Wall_Light_Pair.jpg?v=1789048275"},{"product_id":"foundry-nine-mendip-cast-bronze-knot-bracket-wall-light-antique-verdigris","title":"Foundry Nine Mendip Cast Bronze Knot Bracket Wall Light Antique Verdigris","description":"\u003cp\u003eA length of bronze rope tied in a wall knot, cast from a real hemp original so the lay of the strands survives in the metal. It suits a panelled room or a boot room where a delicate fitting would look out of place.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 200mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766954725708,"sku":"SCH-BRZ-012-VG","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766954758476,"sku":"SCH-BRZ-012-DV","price":1274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Mendip_Cast_Bronze_Knot_Bracket_Wall_Light_Antique_Verdigris.jpg?v=1789048235"},{"product_id":"foundry-nine-netherby-cast-bronze-bronze-arm-with-a-stitched-leather-shade-wall-light","title":"Foundry Nine Netherby Cast Bronze Bronze Arm with a Stitched Leather Shade Wall Light","description":"\u003cp\u003eA plain bronze arm with a shade of vegetable tanned leather, saddle stitched by hand along the seam. The leather darkens with use and with the heat of the lamp, which is the whole idea.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 310mm, width 230mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, vegetable tanned leather shade\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766956233036,"sku":"SCH-BRZ-013-MB","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766956265804,"sku":"SCH-BRZ-013-DB","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766956298572,"sku":"SCH-BRZ-013-LA","price":1249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Netherby_Cast_Bronze_Bronze_Arm_with_a_Stitched_Leather_Shade_Wall_Light.jpg?v=1789048240"},{"product_id":"foundry-nine-netherby-cast-bronze-bronze-arm-with-a-stitched-leather-shade-wall-light-pair","title":"Foundry Nine Netherby Cast Bronze Bronze Arm with a Stitched Leather Shade Wall Light Pair","description":"\u003cp\u003eA plain bronze arm with a shade of vegetable tanned leather, saddle stitched by hand along the seam. The leather darkens with use and with the heat of the lamp, which is the whole idea.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 310mm, width 230mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, vegetable tanned leather shade\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766960820556,"sku":"SCH-BRZ-014-MB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766960853324,"sku":"SCH-BRZ-014-DB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766960886092,"sku":"SCH-BRZ-014-LA","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Netherby_Cast_Bronze_Bronze_Arm_with_a_Stitched_Leather_Shade_Wall_Light_Pair.jpg?v=1789048081"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766963933516,"sku":"SCH-BRZ-016-MB","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766963966284,"sku":"SCH-BRZ-016-DB","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766963999052,"sku":"SCH-BRZ-016-LA","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light.jpg?v=1789048139"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light-pair","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light Pair","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766965277004,"sku":"SCH-BRZ-017-MB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766965309772,"sku":"SCH-BRZ-017-DB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766965342540,"sku":"SCH-BRZ-017-LA","price":2974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light_Pair.jpg?v=1789047974"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light-antique-verdigris","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light Antique Verdigris","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766966620492,"sku":"SCH-BRZ-018-VG","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766966653260,"sku":"SCH-BRZ-018-DV","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light_Antique_Verdigris.jpg?v=1789048251"},{"product_id":"halliwell-crystal-adelaide-cut-crystal-drop-wall-light","title":"Halliwell Crystal Adelaide Cut Crystal Drop Wall Light","description":"\u003cp\u003eThree tiers of hand cut drops hung from a polished brass frame. The cuts are deep enough to split the light properly, so the fitting throws small spectra onto the wall either side of it.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 200mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58766996898124,"sku":"SCH-CRY-001-AB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766996930892,"sku":"SCH-CRY-001-PN","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766996963660,"sku":"SCH-CRY-001-BZ","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Adelaide_Cut_Crystal_Drop_Wall_Light.jpg?v=1789048008"},{"product_id":"halliwell-crystal-adelaide-cut-crystal-drop-wall-light-pair","title":"Halliwell Crystal Adelaide Cut Crystal Drop Wall Light Pair","description":"\u003cp\u003eThree tiers of hand cut drops hung from a polished brass frame. The cuts are deep enough to split the light properly, so the fitting throws small spectra onto the wall either side of it.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 200mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58766998896972,"sku":"SCH-CRY-002-AB","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58766998929740,"sku":"SCH-CRY-002-PN","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58766998962508,"sku":"SCH-CRY-002-BZ","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Adelaide_Cut_Crystal_Drop_Wall_Light_Pair.jpg?v=1789047863"},{"product_id":"halliwell-crystal-adelaide-cut-crystal-drop-wall-light-large","title":"Halliwell Crystal Adelaide Cut Crystal Drop Wall Light Large","description":"\u003cp\u003eThree tiers of hand cut drops hung from a polished brass frame. The cuts are deep enough to split the light properly, so the fitting throws small spectra onto the wall either side of it.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly in the larger size with an extra row of drops.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 475mm, width 250mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767001223500,"sku":"SCH-CRY-003-AB","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767001256268,"sku":"SCH-CRY-003-PN","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767001289036,"sku":"SCH-CRY-003-BZ","price":2024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Adelaide_Cut_Crystal_Drop_Wall_Light_Large_8f8d4222-7834-452f-b1ea-edf6073a70c1.jpg?v=1789047998"},{"product_id":"halliwell-crystal-berkeley-crystal-candle-bracket-with-pendalogues-wall-light","title":"Halliwell Crystal Berkeley Crystal Candle Bracket with Pendalogues Wall Light","description":"\u003cp\u003eA single candle arm hung with pendalogue drops, the long almond shaped crystals used on Georgian chandeliers. Hang it where a door will move the air and it never quite stands still.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767002501452,"sku":"SCH-CRY-004-AB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767002534220,"sku":"SCH-CRY-004-PN","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767002566988,"sku":"SCH-CRY-004-BZ","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Berkeley_Crystal_Candle_Bracket_with_Pendalogues_Wall_Light.jpg?v=1789048004"},{"product_id":"halliwell-crystal-berkeley-crystal-candle-bracket-with-pendalogues-wall-light-pair","title":"Halliwell Crystal Berkeley Crystal Candle Bracket with Pendalogues Wall Light Pair","description":"\u003cp\u003eA single candle arm hung with pendalogue drops, the long almond shaped crystals used on Georgian chandeliers. Hang it where a door will move the air and it never quite stands still.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767004238156,"sku":"SCH-CRY-005-AB","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767004270924,"sku":"SCH-CRY-005-PN","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767004303692,"sku":"SCH-CRY-005-BZ","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Berkeley_Crystal_Candle_Bracket_with_Pendalogues_Wall_Light_Pair.jpg?v=1789048098"},{"product_id":"halliwell-crystal-berkeley-crystal-candle-bracket-with-pendalogues-wall-light-large","title":"Halliwell Crystal Berkeley Crystal Candle Bracket with Pendalogues Wall Light Large","description":"\u003cp\u003eA single candle arm hung with pendalogue drops, the long almond shaped crystals used on Georgian chandeliers. Hang it where a door will move the air and it never quite stands still.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly in the larger size with an extra row of drops.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 425mm, width 225mm, projection from the wall 225mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767005253964,"sku":"SCH-CRY-006-AB","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767005286732,"sku":"SCH-CRY-006-PN","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767005319500,"sku":"SCH-CRY-006-BZ","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Berkeley_Crystal_Candle_Bracket_with_Pendalogues_Wall_Light_Large_e35be8c9-8c76-4929-8c89-31ce70412675.jpg?v=1789048005"},{"product_id":"halliwell-crystal-clarence-crystal-and-brass-twin-arm-wall-light","title":"Halliwell Crystal Clarence Crystal and Brass Twin Arm Wall Light","description":"\u003cp\u003eTwo arms rising from a brass backplate, each carrying a cut crystal bobeche and a candle tube. Substantial without being heavy handed, which is a hard balance in crystal.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 360mm, width 420mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.3 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767007088972,"sku":"SCH-CRY-007-AB","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767007121740,"sku":"SCH-CRY-007-PN","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767007154508,"sku":"SCH-CRY-007-BZ","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Clarence_Crystal_and_Brass_Twin_Arm_Wall_Light.jpg?v=1789048041"},{"product_id":"halliwell-crystal-clarence-crystal-and-brass-twin-arm-wall-light-pair","title":"Halliwell Crystal Clarence Crystal and Brass Twin Arm Wall Light Pair","description":"\u003cp\u003eTwo arms rising from a brass backplate, each carrying a cut crystal bobeche and a candle tube. Substantial without being heavy handed, which is a hard balance in crystal.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 360mm, width 420mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 12.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767008792908,"sku":"SCH-CRY-008-AB","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767008825676,"sku":"SCH-CRY-008-PN","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767008858444,"sku":"SCH-CRY-008-BZ","price":2999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Clarence_Crystal_and_Brass_Twin_Arm_Wall_Light_Pair.jpg?v=1789048005"},{"product_id":"halliwell-crystal-clarence-crystal-and-brass-twin-arm-wall-light-large","title":"Halliwell Crystal Clarence Crystal and Brass Twin Arm Wall Light Large","description":"\u003cp\u003eTwo arms rising from a brass backplate, each carrying a cut crystal bobeche and a candle tube. Substantial without being heavy handed, which is a hard balance in crystal.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly in the larger size with an extra row of drops.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 450mm, width 525mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767010300236,"sku":"SCH-CRY-009-AB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767010333004,"sku":"SCH-CRY-009-PN","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767010365772,"sku":"SCH-CRY-009-BZ","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Clarence_Crystal_and_Brass_Twin_Arm_Wall_Light_Large_2cf1d55b-ad6c-426f-a251-6bbc9516adce.jpg?v=1789047988"},{"product_id":"halliwell-crystal-devonshire-crystal-column-sconce-wall-light","title":"Halliwell Crystal Devonshire Crystal Column Sconce Wall Light","description":"\u003cp\u003eA solid crystal column, ground and polished on six faces, lit from a concealed lamp in the brass foot. The light travels up inside the crystal and comes out of the top face as a bright point.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 120mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767011479884,"sku":"SCH-CRY-010-AB","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767011512652,"sku":"SCH-CRY-010-PN","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767011545420,"sku":"SCH-CRY-010-BZ","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Devonshire_Crystal_Column_Sconce_Wall_Light.jpg?v=1789048139"},{"product_id":"halliwell-crystal-devonshire-crystal-column-sconce-wall-light-pair","title":"Halliwell Crystal Devonshire Crystal Column Sconce Wall Light Pair","description":"\u003cp\u003eA solid crystal column, ground and polished on six faces, lit from a concealed lamp in the brass foot. The light travels up inside the crystal and comes out of the top face as a bright point.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 120mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767011709260,"sku":"SCH-CRY-011-AB","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767011742028,"sku":"SCH-CRY-011-PN","price":3199.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767011774796,"sku":"SCH-CRY-011-BZ","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Devonshire_Crystal_Column_Sconce_Wall_Light_Pair.jpg?v=1789048045"},{"product_id":"halliwell-crystal-egerton-crystal-fan-wall-light-wall-light","title":"Halliwell Crystal Egerton Crystal Fan Wall Light Wall Light","description":"\u003cp\u003eA fan of graduated crystal spears set into a brass mount, an Art Deco shape that has been made in England since the nineteen thirties. It suits a stair half landing where you see it from below.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 400mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767012757836,"sku":"SCH-CRY-012-AB","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767012790604,"sku":"SCH-CRY-012-PN","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767012823372,"sku":"SCH-CRY-012-BZ","price":1474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Egerton_Crystal_Fan_Wall_Light_Wall_Light.jpg?v=1789048009"},{"product_id":"halliwell-crystal-egerton-crystal-fan-wall-light-wall-light-pair","title":"Halliwell Crystal Egerton Crystal Fan Wall Light Wall Light Pair","description":"\u003cp\u003eA fan of graduated crystal spears set into a brass mount, an Art Deco shape that has been made in England since the nineteen thirties. It suits a stair half landing where you see it from below.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 400mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767012888908,"sku":"SCH-CRY-013-AB","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767012921676,"sku":"SCH-CRY-013-PN","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767012954444,"sku":"SCH-CRY-013-BZ","price":2774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Egerton_Crystal_Fan_Wall_Light_Wall_Light_Pair.jpg?v=1789047953"},{"product_id":"halliwell-crystal-egerton-crystal-fan-wall-light-wall-light-large","title":"Halliwell Crystal Egerton Crystal Fan Wall Light Wall Light Large","description":"\u003cp\u003eA fan of graduated crystal spears set into a brass mount, an Art Deco shape that has been made in England since the nineteen thirties. It suits a stair half landing where you see it from below.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly in the larger size with an extra row of drops.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 500mm, width 425mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.3 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767013052748,"sku":"SCH-CRY-014-AB","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767013085516,"sku":"SCH-CRY-014-PN","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767013118284,"sku":"SCH-CRY-014-BZ","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Egerton_Crystal_Fan_Wall_Light_Wall_Light_Large_92670238-aef6-4724-9dd1-7f9aa95b2a7c.jpg?v=1789048006"},{"product_id":"halliwell-crystal-fitzroy-crystal-and-antique-mirror-plate-wall-light","title":"Halliwell Crystal Fitzroy Crystal and Antique Mirror Plate Wall Light","description":"\u003cp\u003eCrystal drops in front of a hand silvered mirror plate, so every drop is doubled and the fitting reads twice as full as it is. The mirror is antiqued by hand and no two plates foxes the same way.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 460mm, width 260mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767013806412,"sku":"SCH-CRY-015-AB","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767013839180,"sku":"SCH-CRY-015-PN","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767013871948,"sku":"SCH-CRY-015-BZ","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Fitzroy_Crystal_and_Antique_Mirror_Plate_Wall_Light.jpg?v=1789048013"},{"product_id":"halliwell-crystal-fitzroy-crystal-and-antique-mirror-plate-wall-light-pair","title":"Halliwell Crystal Fitzroy Crystal and Antique Mirror Plate Wall Light Pair","description":"\u003cp\u003eCrystal drops in front of a hand silvered mirror plate, so every drop is doubled and the fitting reads twice as full as it is. The mirror is antiqued by hand and no two plates foxes the same way.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold as a pair, crystals matched by hand across both fittings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 460mm, width 260mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 15.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767013904716,"sku":"SCH-CRY-016-AB","price":3224.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767013937484,"sku":"SCH-CRY-016-PN","price":3424.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767013970252,"sku":"SCH-CRY-016-BZ","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Fitzroy_Crystal_and_Antique_Mirror_Plate_Wall_Light_Pair.jpg?v=1789048046"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022031180,"sku":"SCH-PLS-001-WH","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022063948,"sku":"SCH-PLS-001-ST","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022096716,"sku":"SCH-PLS-001-CH","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light.jpg?v=1789047949"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-pair","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Pair","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022489932,"sku":"SCH-PLS-002-WH","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022522700,"sku":"SCH-PLS-002-ST","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022555468,"sku":"SCH-PLS-002-CH","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Pair.jpg?v=1789047984"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-large","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Large","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 365mm, width 415mm, projection from the wall 185mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767023341900,"sku":"SCH-PLS-003-WH","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767023374668,"sku":"SCH-PLS-003-ST","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767023407436,"sku":"SCH-PLS-003-CH","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Large_1098940f-10b0-4717-ac09-ccd4e9b83bbb.jpg?v=1789047971"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 220mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767023833420,"sku":"SCH-PLS-004-WH","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767023866188,"sku":"SCH-PLS-004-ST","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767023898956,"sku":"SCH-PLS-004-CH","price":619.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light.jpg?v=1789047964"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light-pair","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light Pair","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 380mm, width 220mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767024423244,"sku":"SCH-PLS-005-WH","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767024456012,"sku":"SCH-PLS-005-ST","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767024488780,"sku":"SCH-PLS-005-CH","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light_Pair.jpg?v=1789048162"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light-large","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light Large","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 465mm, width 270mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.3 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767025209676,"sku":"SCH-PLS-006-WH","price":919.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767025242444,"sku":"SCH-PLS-006-ST","price":919.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767025275212,"sku":"SCH-PLS-006-CH","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light_Large_42b69390-ba9f-4f79-8893-9909cd4aad9d.jpg?v=1789047972"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767025865036,"sku":"SCH-PLS-007-DW","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767025897804,"sku":"SCH-PLS-007-OM","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767025930572,"sku":"SCH-PLS-007-SB","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light.jpg?v=1789047950"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light-pair","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light Pair","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767026323788,"sku":"SCH-PLS-008-DW","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767026356556,"sku":"SCH-PLS-008-OM","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767026389324,"sku":"SCH-PLS-008-SB","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light_Pair.jpg?v=1789047964"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light-large","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light Large","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 315mm, width 365mm, projection from the wall 205mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.1 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767026979148,"sku":"SCH-PLS-009-DW","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767027011916,"sku":"SCH-PLS-009-OM","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767027044684,"sku":"SCH-PLS-009-SB","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light_Large_d793139d-0cce-41c3-9f41-c94bedaa3ac6.jpg?v=1789047950"},{"product_id":"chalkhill-studio-quenby-plaster-column-with-a-flared-top-wall-light","title":"Chalkhill Studio Quenby Plaster Column with a Flared Top Wall Light","description":"\u003cp\u003eA tall plaster column that flares at the head, throwing most of its light at the ceiling and a thin wash down the wall. Good in a stairwell where the ceiling is the surface worth lighting.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 520mm, width 180mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767027634508,"sku":"SCH-PLS-010-WH","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767027667276,"sku":"SCH-PLS-010-ST","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767027700044,"sku":"SCH-PLS-010-CH","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Quenby_Plaster_Column_with_a_Flared_Top_Wall_Light.jpg?v=1789047973"},{"product_id":"chalkhill-studio-quenby-plaster-column-with-a-flared-top-wall-light-pair","title":"Chalkhill Studio Quenby Plaster Column with a Flared Top Wall Light Pair","description":"\u003cp\u003eA tall plaster column that flares at the head, throwing most of its light at the ceiling and a thin wash down the wall. Good in a stairwell where the ceiling is the surface worth lighting.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 520mm, width 180mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 13.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767028191564,"sku":"SCH-PLS-011-WH","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767028224332,"sku":"SCH-PLS-011-ST","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767028257100,"sku":"SCH-PLS-011-CH","price":1424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Quenby_Plaster_Column_with_a_Flared_Top_Wall_Light_Pair.jpg?v=1789047987"},{"product_id":"chalkhill-studio-quenby-plaster-column-with-a-flared-top-wall-light-large","title":"Chalkhill Studio Quenby Plaster Column with a Flared Top Wall Light Large","description":"\u003cp\u003eA tall plaster column that flares at the head, throwing most of its light at the ceiling and a thin wash down the wall. Good in a stairwell where the ceiling is the surface worth lighting.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 635mm, width 220mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.9 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767028683084,"sku":"SCH-PLS-012-WH","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767028715852,"sku":"SCH-PLS-012-ST","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767028748620,"sku":"SCH-PLS-012-CH","price":1099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Quenby_Plaster_Column_with_a_Flared_Top_Wall_Light_Large_1445d799-b949-4838-a498-d1216d3a7361.jpg?v=1789047973"},{"product_id":"chalkhill-studio-rushmore-sculptural-plaster-wave-wall-light","title":"Chalkhill Studio Rushmore Sculptural Plaster Wave Wall Light","description":"\u003cp\u003eA wave form modelled by hand in the studio rather than drawn on a screen, so the curve changes section as it rises. Reads as a piece of sculpture in daylight and as a soft glow at night.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 440mm, width 300mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767029272908,"sku":"SCH-PLS-013-WH","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767029305676,"sku":"SCH-PLS-013-ST","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767029338444,"sku":"SCH-PLS-013-CH","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Rushmore_Sculptural_Plaster_Wave_Wall_Light.jpg?v=1789047862"},{"product_id":"chalkhill-studio-rushmore-sculptural-plaster-wave-wall-light-pair","title":"Chalkhill Studio Rushmore Sculptural Plaster Wave Wall Light Pair","description":"\u003cp\u003eA wave form modelled by hand in the studio rather than drawn on a screen, so the curve changes section as it rises. Reads as a piece of sculpture in daylight and as a soft glow at night.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 440mm, width 300mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767029797196,"sku":"SCH-PLS-014-WH","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767029829964,"sku":"SCH-PLS-014-ST","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767029862732,"sku":"SCH-PLS-014-CH","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Rushmore_Sculptural_Plaster_Wave_Wall_Light_Pair.jpg?v=1789047911"},{"product_id":"chalkhill-studio-rushmore-sculptural-plaster-wave-wall-light-large","title":"Chalkhill Studio Rushmore Sculptural Plaster Wave Wall Light Large","description":"\u003cp\u003eA wave form modelled by hand in the studio rather than drawn on a screen, so the curve changes section as it rises. Reads as a piece of sculpture in daylight and as a soft glow at night.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 535mm, width 365mm, projection from the wall 195mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767030288716,"sku":"SCH-PLS-015-WH","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767030321484,"sku":"SCH-PLS-015-ST","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767030354252,"sku":"SCH-PLS-015-CH","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Rushmore_Sculptural_Plaster_Wave_Wall_Light_Large_e28b4dd2-9d72-497e-8138-3bdcadb49d9e.jpg?v=1789047986"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 320mm, width 280mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767030813004,"sku":"SCH-PLS-016-DW","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767030845772,"sku":"SCH-PLS-016-OM","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767030878540,"sku":"SCH-PLS-016-SB","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light.jpg?v=1789048130"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light-pair","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light Pair","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold as a pair, cast in the same batch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 320mm, width 280mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.0 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767031337292,"sku":"SCH-PLS-017-DW","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767031370060,"sku":"SCH-PLS-017-OM","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767031402828,"sku":"SCH-PLS-017-SB","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light_Pair.jpg?v=1789048068"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light-large","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light Large","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 390mm, width 340mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767031894348,"sku":"SCH-PLS-018-DW","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767031927116,"sku":"SCH-PLS-018-OM","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767031959884,"sku":"SCH-PLS-018-SB","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light_Large_347a8b12-6ae9-45ec-b889-d071bf062c16.jpg?v=1789048139"},{"product_id":"salvage-row-restored-edwardian-brass-gas-converted-wall-light-single","title":"Salvage Row Restored Edwardian Brass Gas Converted Wall Light Single","description":"\u003cp\u003eOriginally a gas bracket, converted to electricity at some point before the war and converted again by us to something a modern electrician will sign off. The gas tap is still there and still turns, because removing it would be vandalism.\u003c\/p\u003e\u003cp\u003eEverything we sell has been through the same process. Stripped to components, cleaned by hand rather than blasted, rewired end to end with silicone insulated cable, fitted with new lampholders and a proper earth, then PAT tested and certificated. We do not re-plate or re-lacquer unless the original finish has failed, because a hundred years of patina is the reason to buy an antique in the first place. One fitting only. When it is gone it is gone.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight see photographs, width see photographs, projection from the wall see photographs\u003c\/li\u003e\n\u003cli\u003eMaterials: original materials, brass, some pitting consistent with age\u003c\/li\u003e\n\u003cli\u003eFinish: original finish retained, honest wear present\u003c\/li\u003e\n\u003cli\u003eLamp: rewired for E14 or E27 depending on the fitting, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: original backplate, may not cover a modern round pattress\u003c\/li\u003e\n\u003cli\u003ePeriod: circa 1905\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.2 kilograms\u003c\/li\u003e\n\u003cli\u003eFully rewired with a PAT test certificate\u003c\/li\u003e\n\u003cli\u003eSold as seen, with photographs of every mark before purchase\u003c\/li\u003e\n\u003cli\u003eOne only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Original backplates are often smaller than a modern pattress, so check what is behind your existing fitting before you take it off the wall.\u003c\/p\u003e","brand":"Salvage Row","offers":[{"title":"Rewired and PAT tested","offer_id":58767045132620,"sku":"SCH-ANT-001-RW","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Rewired with a plug in flex","offer_id":58767045165388,"sku":"SCH-ANT-001-PL","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Salvage_Row_Restored_Edwardian_Brass_Gas_Converted_Wall_Light_Single.jpg?v=1789048930"}],"url":"https:\/\/thesconcehouse.com\/collections\/hallway-and-landing.oembed?page=2","provider":"The Sconce House","version":"1.0","type":"link"}