{"title":"Foundry Nine","description":"\u003cp\u003eSand cast bronze, hand modelled and patinated. Branches, leaves, knots and torches, available bright or in antique verdigris.\u003c\/p\u003e","products":[{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766939652428,"sku":"SCH-BRZ-001-MB","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766939685196,"sku":"SCH-BRZ-001-DB","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766939717964,"sku":"SCH-BRZ-001-LA","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light.jpg?v=1789048065"},{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light-pair","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light Pair","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766939947340,"sku":"SCH-BRZ-002-MB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766939980108,"sku":"SCH-BRZ-002-DB","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766940012876,"sku":"SCH-BRZ-002-LA","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light_Pair.jpg?v=1789048066"},{"product_id":"foundry-nine-ironside-cast-bronze-branch-sconce-wall-light-antique-verdigris","title":"Foundry Nine Ironside Cast Bronze Branch Sconce Wall Light Antique Verdigris","description":"\u003cp\u003eA bronze branch that grows out of the wall and carries a single candle at its tip. The original was modelled in wax from a blackthorn cutting, so the bark texture is a real one rather than a sculptor's idea of bark.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766941389132,"sku":"SCH-BRZ-003-VG","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766941421900,"sku":"SCH-BRZ-003-DV","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ironside_Cast_Bronze_Branch_Sconce_Wall_Light_Antique_Verdigris.jpg?v=1789048071"},{"product_id":"foundry-nine-kelston-cast-bronze-hand-modelled-leaf-wall-light","title":"Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light","description":"\u003cp\u003eA single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 290mm, width 160mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766943125836,"sku":"SCH-BRZ-004-MB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766943158604,"sku":"SCH-BRZ-004-DB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766943191372,"sku":"SCH-BRZ-004-LA","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Hand_Modelled_Leaf_Wall_Light.jpg?v=1789048268"},{"product_id":"foundry-nine-kelston-cast-bronze-hand-modelled-leaf-wall-light-antique-verdigris","title":"Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light Antique Verdigris","description":"\u003cp\u003eA single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 290mm, width 160mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766946042188,"sku":"SCH-BRZ-006-VG","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766946074956,"sku":"SCH-BRZ-006-DV","price":1174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Hand_Modelled_Leaf_Wall_Light_Antique_Verdigris.jpg?v=1789048275"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766947516748,"sku":"SCH-BRZ-007-MB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766947549516,"sku":"SCH-BRZ-007-DB","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766947582284,"sku":"SCH-BRZ-007-LA","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light.jpg?v=1789048210"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-pair","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Pair","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 11.6 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766949318988,"sku":"SCH-BRZ-008-MB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766949351756,"sku":"SCH-BRZ-008-DB","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766949384524,"sku":"SCH-BRZ-008-LA","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Pair.jpg?v=1789048287"},{"product_id":"foundry-nine-larkhall-cast-bronze-torch-uplighter-wall-light-antique-verdigris","title":"Foundry Nine Larkhall Cast Bronze Torch Uplighter Wall Light Antique Verdigris","description":"\u003cp\u003eA bronze torch bracket, the kind that lit a stair before there was wiring to light it. The flame is a hand blown glass cone that sits inside the cup and glows amber from the shoulder up.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 150mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, hand blown glass cone\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766951285068,"sku":"SCH-BRZ-009-VG","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766951317836,"sku":"SCH-BRZ-009-DV","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Larkhall_Cast_Bronze_Torch_Uplighter_Wall_Light_Antique_Verdigris.jpg?v=1789048096"},{"product_id":"foundry-nine-mendip-cast-bronze-knot-bracket-wall-light-pair","title":"Foundry Nine Mendip Cast Bronze Knot Bracket Wall Light Pair","description":"\u003cp\u003eA length of bronze rope tied in a wall knot, cast from a real hemp original so the lay of the strands survives in the metal. It suits a panelled room or a boot room where a delicate fitting would look out of place.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 260mm, width 200mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 10.4 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766953513292,"sku":"SCH-BRZ-011-MB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766953546060,"sku":"SCH-BRZ-011-DB","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766953578828,"sku":"SCH-BRZ-011-LA","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Mendip_Cast_Bronze_Knot_Bracket_Wall_Light_Pair.jpg?v=1789048275"},{"product_id":"foundry-nine-mendip-cast-bronze-knot-bracket-wall-light-antique-verdigris","title":"Foundry Nine Mendip Cast Bronze Knot Bracket Wall Light Antique Verdigris","description":"\u003cp\u003eA length of bronze rope tied in a wall knot, cast from a real hemp original so the lay of the strands survives in the metal. It suits a panelled room or a boot room where a delicate fitting would look out of place.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 200mm, projection from the wall 190mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766954725708,"sku":"SCH-BRZ-012-VG","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766954758476,"sku":"SCH-BRZ-012-DV","price":1274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Mendip_Cast_Bronze_Knot_Bracket_Wall_Light_Antique_Verdigris.jpg?v=1789048235"},{"product_id":"foundry-nine-netherby-cast-bronze-bronze-arm-with-a-stitched-leather-shade-wall-light","title":"Foundry Nine Netherby Cast Bronze Bronze Arm with a Stitched Leather Shade Wall Light","description":"\u003cp\u003eA plain bronze arm with a shade of vegetable tanned leather, saddle stitched by hand along the seam. The leather darkens with use and with the heat of the lamp, which is the whole idea.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 310mm, width 230mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, vegetable tanned leather shade\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766956233036,"sku":"SCH-BRZ-013-MB","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766956265804,"sku":"SCH-BRZ-013-DB","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766956298572,"sku":"SCH-BRZ-013-LA","price":1249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Netherby_Cast_Bronze_Bronze_Arm_with_a_Stitched_Leather_Shade_Wall_Light.jpg?v=1789048240"},{"product_id":"foundry-nine-netherby-cast-bronze-bronze-arm-with-a-stitched-leather-shade-wall-light-pair","title":"Foundry Nine Netherby Cast Bronze Bronze Arm with a Stitched Leather Shade Wall Light Pair","description":"\u003cp\u003eA plain bronze arm with a shade of vegetable tanned leather, saddle stitched by hand along the seam. The leather darkens with use and with the heat of the lamp, which is the whole idea.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 310mm, width 230mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm, vegetable tanned leather shade\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.2 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766960820556,"sku":"SCH-BRZ-014-MB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766960853324,"sku":"SCH-BRZ-014-DB","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766960886092,"sku":"SCH-BRZ-014-LA","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Netherby_Cast_Bronze_Bronze_Arm_with_a_Stitched_Leather_Shade_Wall_Light_Pair.jpg?v=1789048081"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766963933516,"sku":"SCH-BRZ-016-MB","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766963966284,"sku":"SCH-BRZ-016-DB","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766963999052,"sku":"SCH-BRZ-016-LA","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light.jpg?v=1789048139"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light-pair","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light Pair","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold as a pair, poured from the same mould in the same session so the patina matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 14.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766965277004,"sku":"SCH-BRZ-017-MB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766965309772,"sku":"SCH-BRZ-017-DB","price":2874.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766965342540,"sku":"SCH-BRZ-017-LA","price":2974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light_Pair.jpg?v=1789047974"},{"product_id":"foundry-nine-ombersley-cast-bronze-double-candle-bracket-wall-light-antique-verdigris","title":"Foundry Nine Ombersley Cast Bronze Double Candle Bracket Wall Light Antique Verdigris","description":"\u003cp\u003eTwo candle arms on one cast backplate, the arms swept up so the flames sit level with each other. A heavy piece with a lot of metal in it, meant for a hall or a dining room where the fitting is part of the architecture.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly with the verdigris patina, which is brought up chemically by hand and then waxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 330mm, width 420mm, projection from the wall 230mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied verdigris patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x E14 candle, maximum 40W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Verdigris","offer_id":58766966620492,"sku":"SCH-BRZ-018-VG","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Dark verdigris","offer_id":58766966653260,"sku":"SCH-BRZ-018-DV","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Ombersley_Cast_Bronze_Double_Candle_Bracket_Wall_Light_Antique_Verdigris.jpg?v=1789048251"},{"product_id":"foundry-nine-kelston-cast-bronze-leaf-set-of-4","title":"Foundry Nine Kelston Cast Bronze Leaf Set of 4","description":"\u003cp\u003eFour bronze leaves poured and patinated together, for a dining room or a hotel corridor.\u003c\/p\u003e\u003cp\u003eBuying a run as a set is cheaper per fitting and, more importantly, gets you fittings that actually match. Finishes drift between production runs, glass drifts between blowing sessions and LED boards drift between bins. A set is made, finished and packed together, then checked side by side on a bench before it is boxed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: as the single fitting, width as the single fitting, projection from the wall as the single fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: as the single fitting, see that listing for the full specification\u003c\/li\u003e\n\u003cli\u003eFinish: one finish across the whole set, chosen at order\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: as the single fitting\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: as the single fitting\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 fittings\u003c\/li\u003e\n\u003cli\u003eSaving against buying singly: about 5 per cent\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 16.4 kilograms\u003c\/li\u003e\n\u003cli\u003ePacked in one consignment, checked side by side before boxing\u003c\/li\u003e\n\u003cli\u003eSold as a set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Each fitting is boxed separately inside the outer carton so your electrician can take them one at a time.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Antique brass","offer_id":58767072002380,"sku":"SCH-SET-003-AB","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767072035148,"sku":"SCH-SET-003-PN","price":3774.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767072067916,"sku":"SCH-SET-003-BZ","price":3774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Leaf_Set_of_4.jpg?v=1789048173"}],"url":"https:\/\/thesconcehouse.com\/collections\/foundry-nine.oembed","provider":"The Sconce House","version":"1.0","type":"link"}