{"title":"300 to 1000 Pounds","description":"\u003cp\u003eWorkshop made brass, blown glass and plaster. Where most of the hardwired range sits.\u003c\/p\u003e","products":[{"product_id":"foundry-nine-kelston-cast-bronze-hand-modelled-leaf-wall-light","title":"Foundry Nine Kelston Cast Bronze Hand Modelled Leaf Wall Light","description":"\u003cp\u003eA single bay leaf in bronze, folded so it cups the lamp and hides it from anyone standing in the room. The light comes back off the inner face of the leaf and picks up the warm tone of the metal.\u003c\/p\u003e\u003cp\u003eCast by the lost wax method in a Somerset foundry. A wax original is invested in a ceramic shell, the wax is burned out and the bronze is poured into the void that is left, which is why the surface holds so much detail. Every casting is then chased, patinated and waxed by hand. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 290mm, width 160mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid bronze, sand cast backplate, cast bronze arm\u003c\/li\u003e\n\u003cli\u003eFinish: hand applied patina over bronze, sealed with microcrystalline wax\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x G9, maximum 33W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: cast bronze, 110mm diameter, 12mm thick\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cast to order\u003c\/li\u003e\n\u003cli\u003eEach casting is unique and small variations are expected\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Foundry Nine","offers":[{"title":"Mid bronze","offer_id":58766943125836,"sku":"SCH-BRZ-004-MB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Dark bronze","offer_id":58766943158604,"sku":"SCH-BRZ-004-DB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Light antique","offer_id":58766943191372,"sku":"SCH-BRZ-004-LA","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Foundry_Nine_Kelston_Cast_Bronze_Hand_Modelled_Leaf_Wall_Light.jpg?v=1789048268"},{"product_id":"halliwell-crystal-berkeley-crystal-candle-bracket-with-pendalogues-wall-light","title":"Halliwell Crystal Berkeley Crystal Candle Bracket with Pendalogues Wall Light","description":"\u003cp\u003eA single candle arm hung with pendalogue drops, the long almond shaped crystals used on Georgian chandeliers. Hang it where a door will move the air and it never quite stands still.\u003c\/p\u003e\u003cp\u003eEvery crystal is cut and polished on a wheel by hand in the Midlands, then hung on brass pins rather than wire so nothing rattles. The frames are cast brass, not plated steel, which is why the fitting has weight in the hand and why the finish will still be there in twenty years. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 180mm\u003c\/li\u003e\n\u003cli\u003eMaterials: hand cut lead crystal on a cast brass frame\u003c\/li\u003e\n\u003cli\u003eFinish: crystal polished clear, brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round cast brass, 115mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 4 to 6 weeks, cut and strung to order\u003c\/li\u003e\n\u003cli\u003eSupplied with a cleaning glove and six spare pins\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Halliwell Crystal","offers":[{"title":"Antique brass","offer_id":58767002501452,"sku":"SCH-CRY-004-AB","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767002534220,"sku":"SCH-CRY-004-PN","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767002566988,"sku":"SCH-CRY-004-BZ","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Halliwell_Crystal_Berkeley_Crystal_Candle_Bracket_with_Pendalogues_Wall_Light.jpg?v=1789048004"},{"product_id":"marlow-and-reade-hollis-solid-brass-swing-arm-with-a-linen-shade-wall-light","title":"Marlow and Reade Hollis Solid Brass Swing Arm with a Linen Shade Wall Light","description":"\u003cp\u003eA single jointed swing arm with a hand rolled linen shade. The joint is a brass friction knuckle you tighten with a coin, so the arm stays exactly where you put it instead of drifting down over a month.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 180mm to 520mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a hand rolled linen shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 180mm to 520mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014003020,"sku":"SCH-SWG-001-AB","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014035788,"sku":"SCH-SWG-001-PB","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014068556,"sku":"SCH-SWG-001-PN","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014101324,"sku":"SCH-SWG-001-BZ","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Hollis_Solid_Brass_Swing_Arm_with_a_Linen_Shade_Wall_Light.jpg?v=1789048495"},{"product_id":"marlow-and-reade-hollis-solid-brass-swing-arm-with-a-linen-shade-wall-light-plug-in","title":"Marlow and Reade Hollis Solid Brass Swing Arm with a Linen Shade Wall Light Plug In","description":"\u003cp\u003eA single jointed swing arm with a hand rolled linen shade. The joint is a brass friction knuckle you tighten with a coin, so the arm stays exactly where you put it instead of drifting down over a month.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Supplied as a plug in fitting with a two metre braided flex, a moulded UK plug and an inline switch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 180mm, projection from the wall 180mm to 520mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a hand rolled linen shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: plug in, 2 metre braided flex with a moulded UK plug fitted\u003c\/li\u003e\n\u003cli\u003eSwitching: inline rocker switch on the flex, 400mm from the fitting\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 180mm to 520mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 3.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014297932,"sku":"SCH-SWG-003-AB","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014330700,"sku":"SCH-SWG-003-PB","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014363468,"sku":"SCH-SWG-003-PN","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014396236,"sku":"SCH-SWG-003-BZ","price":859.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Hollis_Solid_Brass_Swing_Arm_with_a_Linen_Shade_Wall_Light_Plug_In.jpg?v=1789048365"},{"product_id":"marlow-and-reade-ingleby-solid-brass-double-jointed-library-arm-wall-light-plug-in","title":"Marlow and Reade Ingleby Solid Brass Double Jointed Library Arm Wall Light Plug In","description":"\u003cp\u003eTwo joints and a longer reach, the arm a library would have fitted over a reading chair. It folds flat to 150mm when you are not using it and pulls out to almost three quarters of a metre when you are.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Supplied as a plug in fitting with a two metre braided flex, a moulded UK plug and an inline switch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 160mm, projection from the wall 150mm to 740mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: plug in, 2 metre braided flex with a moulded UK plug fitted\u003c\/li\u003e\n\u003cli\u003eSwitching: inline rocker switch on the flex, 400mm from the fitting\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 150mm to 740mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 4.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014691148,"sku":"SCH-SWG-006-AB","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014723916,"sku":"SCH-SWG-006-PB","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014756684,"sku":"SCH-SWG-006-PN","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014789452,"sku":"SCH-SWG-006-BZ","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Ingleby_Solid_Brass_Double_Jointed_Library_Arm_Wall_Light_Plug_In.jpg?v=1789048650"},{"product_id":"marlow-and-reade-jesmond-solid-brass-reading-arm-with-a-metal-cone-shade-wall-light","title":"Marlow and Reade Jesmond Solid Brass Reading Arm with a Metal Cone Shade Wall Light","description":"\u003cp\u003eA spun brass cone on an adjustable arm, the shade deep enough to keep the lamp out of the eye of anyone lying down. This is the one people buy for a bedside when they read and their partner does not.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 150mm, projection from the wall 170mm to 480mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 170mm to 480mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767014854988,"sku":"SCH-SWG-007-AB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767014887756,"sku":"SCH-SWG-007-PB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767014920524,"sku":"SCH-SWG-007-PN","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767014953292,"sku":"SCH-SWG-007-BZ","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Jesmond_Solid_Brass_Reading_Arm_with_a_Metal_Cone_Shade_Wall_Light.jpg?v=1789048609"},{"product_id":"marlow-and-reade-jesmond-solid-brass-reading-arm-with-a-metal-cone-shade-wall-light-plug-in","title":"Marlow and Reade Jesmond Solid Brass Reading Arm with a Metal Cone Shade Wall Light Plug In","description":"\u003cp\u003eA spun brass cone on an adjustable arm, the shade deep enough to keep the lamp out of the eye of anyone lying down. This is the one people buy for a bedside when they read and their partner does not.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Supplied as a plug in fitting with a two metre braided flex, a moulded UK plug and an inline switch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 150mm, projection from the wall 170mm to 480mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: plug in, 2 metre braided flex with a moulded UK plug fitted\u003c\/li\u003e\n\u003cli\u003eSwitching: inline rocker switch on the flex, 400mm from the fitting\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 170mm to 480mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 3.3 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767015149900,"sku":"SCH-SWG-009-AB","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767015182668,"sku":"SCH-SWG-009-PB","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767015215436,"sku":"SCH-SWG-009-PN","price":759.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767015248204,"sku":"SCH-SWG-009-BZ","price":779.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Jesmond_Solid_Brass_Reading_Arm_with_a_Metal_Cone_Shade_Wall_Light_Plug_In.jpg?v=1789048606"},{"product_id":"marlow-and-reade-lambourne-solid-brass-gooseneck-with-milk-glass-wall-light","title":"Marlow and Reade Lambourne Solid Brass Gooseneck with Milk Glass Wall Light","description":"\u003cp\u003eA heavy gooseneck in solid brass with a milk glass shade screwed into a brass gallery. The gooseneck holds any position you bend it into and will keep doing so for decades because the tube is thick walled.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 180mm, projection from the wall 300mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a milk glass shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 300mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767018492236,"sku":"SCH-SWG-013-AB","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767018525004,"sku":"SCH-SWG-013-PB","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767018557772,"sku":"SCH-SWG-013-PN","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767018590540,"sku":"SCH-SWG-013-BZ","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Lambourne_Solid_Brass_Gooseneck_with_Milk_Glass_Wall_Light.jpg?v=1789048650"},{"product_id":"marlow-and-reade-lambourne-solid-brass-gooseneck-with-milk-glass-wall-light-plug-in","title":"Marlow and Reade Lambourne Solid Brass Gooseneck with Milk Glass Wall Light Plug In","description":"\u003cp\u003eA heavy gooseneck in solid brass with a milk glass shade screwed into a brass gallery. The gooseneck holds any position you bend it into and will keep doing so for decades because the tube is thick walled.\u003c\/p\u003e\u003cp\u003eTurned and machined from solid brass bar in Birmingham, not spun from sheet and not plated steel. The arms run on machined brass knuckles with PTFE washers, so the movement is smooth from the first day and stays that way. Finishes are applied to the metal itself, so a scratch shows brass underneath rather than a different colour. Supplied as a plug in fitting with a two metre braided flex, a moulded UK plug and an inline switch.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 180mm, projection from the wall 300mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass throughout with a milk glass shade\u003c\/li\u003e\n\u003cli\u003eFinish: living finish, will mellow with handling unless lacquered\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: plug in, 2 metre braided flex with a moulded UK plug fitted\u003c\/li\u003e\n\u003cli\u003eSwitching: inline rocker switch on the flex, 400mm from the fitting\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round solid brass, 105mm diameter, 8mm thick\u003c\/li\u003e\n\u003cli\u003eReach: 300mm from the wall\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 2 to 3 weeks\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a plug in fitting, so no electrician is needed. Two keyhole slots on the backplate take a pair of screws, and the flex drops from the lower edge of the backplate. If you would rather run the cable down inside the wall, an electrician can convert it to a hardwired fitting and the flex simply comes off. At roughly 4.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767019639116,"sku":"SCH-SWG-015-AB","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767019671884,"sku":"SCH-SWG-015-PB","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767019704652,"sku":"SCH-SWG-015-PN","price":929.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767019737420,"sku":"SCH-SWG-015-BZ","price":949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Lambourne_Solid_Brass_Gooseneck_with_Milk_Glass_Wall_Light_Plug_In.jpg?v=1789048790"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 340mm, projection from the wall 150mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767022031180,"sku":"SCH-PLS-001-WH","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767022063948,"sku":"SCH-PLS-001-ST","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767022096716,"sku":"SCH-PLS-001-CH","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light.jpg?v=1789047949"},{"product_id":"chalkhill-studio-norbury-plaster-shell-uplighter-wall-light-large","title":"Chalkhill Studio Norbury Plaster Shell Uplighter Wall Light Large","description":"\u003cp\u003eA shell uplighter cast in fine plaster from a mould taken off a hand carved original. Left raw it takes emulsion straight from the tin, so it can disappear into the wall colour completely.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 365mm, width 415mm, projection from the wall 185mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767023341900,"sku":"SCH-PLS-003-WH","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767023374668,"sku":"SCH-PLS-003-ST","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767023407436,"sku":"SCH-PLS-003-CH","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Norbury_Plaster_Shell_Uplighter_Wall_Light_Large_1098940f-10b0-4717-ac09-ccd4e9b83bbb.jpg?v=1789047971"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 380mm, width 220mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767023833420,"sku":"SCH-PLS-004-WH","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767023866188,"sku":"SCH-PLS-004-ST","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767023898956,"sku":"SCH-PLS-004-CH","price":619.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light.jpg?v=1789047964"},{"product_id":"chalkhill-studio-oakley-plaster-ribbon-sconce-wall-light-large","title":"Chalkhill Studio Oakley Plaster Ribbon Sconce Wall Light Large","description":"\u003cp\u003eA twist of plaster ribbon that appears to be pinned to the wall and folded back on itself. It is a difficult cast and the reason we lose about one in five out of the mould.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 465mm, width 270mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.3 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767025209676,"sku":"SCH-PLS-006-WH","price":919.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767025242444,"sku":"SCH-PLS-006-ST","price":919.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767025275212,"sku":"SCH-PLS-006-CH","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Oakley_Plaster_Ribbon_Sconce_Wall_Light_Large_42b69390-ba9f-4f79-8893-9909cd4aad9d.jpg?v=1789047972"},{"product_id":"chalkhill-studio-pemberley-hand-thrown-ceramic-bowl-uplighter-wall-light","title":"Chalkhill Studio Pemberley Hand Thrown Ceramic Bowl Uplighter Wall Light","description":"\u003cp\u003eA stoneware bowl thrown on the wheel and glazed in a soft dolomite white that breaks to cream on the rim. Fired to 1260 degrees so the body is fully vitrified and will not craze over a radiator.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 260mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.4 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767025865036,"sku":"SCH-PLS-007-DW","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767025897804,"sku":"SCH-PLS-007-OM","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767025930572,"sku":"SCH-PLS-007-SB","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Pemberley_Hand_Thrown_Ceramic_Bowl_Uplighter_Wall_Light.jpg?v=1789047950"},{"product_id":"chalkhill-studio-quenby-plaster-column-with-a-flared-top-wall-light","title":"Chalkhill Studio Quenby Plaster Column with a Flared Top Wall Light","description":"\u003cp\u003eA tall plaster column that flares at the head, throwing most of its light at the ceiling and a thin wash down the wall. Good in a stairwell where the ceiling is the surface worth lighting.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 520mm, width 180mm, projection from the wall 130mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767027634508,"sku":"SCH-PLS-010-WH","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767027667276,"sku":"SCH-PLS-010-ST","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767027700044,"sku":"SCH-PLS-010-CH","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Quenby_Plaster_Column_with_a_Flared_Top_Wall_Light.jpg?v=1789047973"},{"product_id":"chalkhill-studio-rushmore-sculptural-plaster-wave-wall-light","title":"Chalkhill Studio Rushmore Sculptural Plaster Wave Wall Light","description":"\u003cp\u003eA wave form modelled by hand in the studio rather than drawn on a screen, so the curve changes section as it rises. Reads as a piece of sculpture in daylight and as a soft glow at night.\u003c\/p\u003e\u003cp\u003eCast in fine casting plaster reinforced with jute scrim, then rubbed back by hand. It arrives raw and slightly chalky. Most people paint it the colour of the wall so the fitting reads as part of the plasterwork, and it takes emulsion, chalk paint or limewash without a primer. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 440mm, width 300mm, projection from the wall 160mm\u003c\/li\u003e\n\u003cli\u003eMaterials: fine casting plaster on a jute scrim with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: raw plaster, ready to paint, or painted in one of three studio colours\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x G9, maximum 33W each, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Chalk white","offer_id":58767029272908,"sku":"SCH-PLS-013-WH","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Stone","offer_id":58767029305676,"sku":"SCH-PLS-013-ST","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Deep charcoal","offer_id":58767029338444,"sku":"SCH-PLS-013-CH","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Rushmore_Sculptural_Plaster_Wave_Wall_Light.jpg?v=1789047862"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 320mm, width 280mm, projection from the wall 140mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767030813004,"sku":"SCH-PLS-016-DW","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767030845772,"sku":"SCH-PLS-016-OM","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767030878540,"sku":"SCH-PLS-016-SB","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light.jpg?v=1789048130"},{"product_id":"chalkhill-studio-stanway-glazed-ceramic-scallop-wall-light-large","title":"Chalkhill Studio Stanway Glazed Ceramic Scallop Wall Light Large","description":"\u003cp\u003eA scallop in glazed stoneware, the flutes pressed while the clay is still soft so they carry a little of the maker's thumb. Available in three glazes that all sit quietly against plaster and against paint.\u003c\/p\u003e\u003cp\u003eThrown, glazed and fired in our Dorset studio in small batches. Stoneware moves in the kiln, so height and diameter vary by a few millimetres between pieces and glaze pools differently on every one. Sold singly in the larger size, half as big again.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 390mm, width 340mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: glazed stoneware with a steel backplate\u003c\/li\u003e\n\u003cli\u003eFinish: three glazes to choose from\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: steel, 110mm diameter, painted to match\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks\u003c\/li\u003e\n\u003cli\u003eHairline variation in the surface is characteristic of the material\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Chalkhill Studio","offers":[{"title":"Dolomite white","offer_id":58767031894348,"sku":"SCH-PLS-018-DW","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Oatmeal","offer_id":58767031927116,"sku":"SCH-PLS-018-OM","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Slate blue","offer_id":58767031959884,"sku":"SCH-PLS-018-SB","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Chalkhill_Studio_Stanway_Glazed_Ceramic_Scallop_Wall_Light_Large_347a8b12-6ae9-45ec-b889-d071bf062c16.jpg?v=1789048139"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-300mm","title":"Marlow and Reade Turnham Traditional Brass Picture Light 300mm","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 110mm, width 300mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures up to 450mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767032451404,"sku":"SCH-PIC-001-AB","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767032484172,"sku":"SCH-PIC-001-PB","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767032516940,"sku":"SCH-PIC-001-PN","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767032549708,"sku":"SCH-PIC-001-BZ","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_300mm.jpg?v=1789048819"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-450mm","title":"Marlow and Reade Turnham Traditional Brass Picture Light 450mm","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 110mm, width 450mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 450mm to 700mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767032975692,"sku":"SCH-PIC-002-AB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767033008460,"sku":"SCH-PIC-002-PB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767033041228,"sku":"SCH-PIC-002-PN","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767033073996,"sku":"SCH-PIC-002-BZ","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_450mm.jpg?v=1789048796"},{"product_id":"marlow-and-reade-turnham-traditional-brass-picture-light-600mm","title":"Marlow and Reade Turnham Traditional Brass Picture Light 600mm","description":"\u003cp\u003eThe traditional half round hood on a swan neck, the fitting a gallery would have used before anyone thought of putting LEDs in a strip. The hood tilts through forty degrees so you can take the reflection off glazed work. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 110mm, width 600mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: brass hood with a tilting swan neck\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED strip, 2700K, CRI 95, 8 to 26W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 700mm to 950mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.8 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767033598284,"sku":"SCH-PIC-003-AB","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767033631052,"sku":"SCH-PIC-003-PB","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767033663820,"sku":"SCH-PIC-003-PN","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767033696588,"sku":"SCH-PIC-003-BZ","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Turnham_Traditional_Brass_Picture_Light_600mm.jpg?v=1789048796"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-300mm","title":"Marlow and Reade Uffington Slimline LED Picture Light 300mm","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 45mm, width 300mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures up to 450mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 1.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767038513484,"sku":"SCH-PIC-011-AB","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767038546252,"sku":"SCH-PIC-011-PB","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767038579020,"sku":"SCH-PIC-011-PN","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767038611788,"sku":"SCH-PIC-011-BZ","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_300mm.jpg?v=1789048502"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-450mm","title":"Marlow and Reade Uffington Slimline LED Picture Light 450mm","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 45mm, width 450mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 450mm to 700mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.1 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767039037772,"sku":"SCH-PIC-012-AB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767039070540,"sku":"SCH-PIC-012-PB","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767039103308,"sku":"SCH-PIC-012-PN","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767039136076,"sku":"SCH-PIC-012-BZ","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_450mm.jpg?v=1789048767"},{"product_id":"marlow-and-reade-uffington-slimline-led-picture-light-600mm","title":"Marlow and Reade Uffington Slimline LED Picture Light 600mm","description":"\u003cp\u003eA 22mm deep bar rather than a hood, close enough to the frame that it disappears when you stand square to the picture. The optic pushes the light down and forward instead of spilling it onto the wall above. Sold singly.\u003c\/p\u003e\u003cp\u003eMade from solid brass in Birmingham with the LED board and driver built in, so there is no transformer to hide in the ceiling void. The board is specified at CRI 95 or better, which matters more on a painting than brightness does: a low CRI source flattens reds and greys and makes an oil look muddy. Every length is on the same 2700K bin so a wall of them matches.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 45mm, width 600mm, projection from the wall 95mm\u003c\/li\u003e\n\u003cli\u003eMaterials: extruded brass bar, 22mm deep, with a fixed optic\u003c\/li\u003e\n\u003cli\u003eFinish: solid brass in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLamp: warm white LED, 2700K, CRI 97, 6 to 22W by length\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, or plug in with the optional cord set, 220 to 240V\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: concealed, fixes to the wall or to the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for pictures 700mm to 950mm wide\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white, fixed\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms\u003c\/li\u003e\n\u003cli\u003eRated life: 50,000 hours\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.8 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. It can be fixed to the wall above the picture or screwed to the top rail of the frame itself, and both sets of fixings are in the box.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767039562060,"sku":"SCH-PIC-013-AB","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767039594828,"sku":"SCH-PIC-013-PB","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767039627596,"sku":"SCH-PIC-013-PN","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767039660364,"sku":"SCH-PIC-013-BZ","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Uffington_Slimline_LED_Picture_Light_600mm.jpg?v=1789048503"},{"product_id":"atelier-sconce-house-bespoke-alabaster-wall-light-to-your-dimensions","title":"Atelier Sconce House Bespoke Alabaster Wall Light to Your Dimensions","description":"\u003cp\u003eYou give us a height, a width and a projection and we cut the alabaster to it. Useful when a chimney breast or a panel run leaves you a space that no standard fitting fills.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: any size up to 900mm in the longest dimension\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 8.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDrawing issued for approval before any stone is cut\u003c\/li\u003e\n\u003cli\u003eChoice of honey, white or cream alabaster\u003c\/li\u003e\n\u003cli\u003eBrass frame in any of our standard finishes or a matched bespoke one\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 8.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043428684,"sku":"SCH-BSP-001-DEP","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043461452,"sku":"SCH-BSP-001-FUL","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Alabaster_Wall_Light_to_Your_Dimensions.jpg?v=1789048037"},{"product_id":"atelier-sconce-house-bespoke-solid-brass-swing-arm-to-your-reach","title":"Atelier Sconce House Bespoke Solid Brass Swing Arm to Your Reach","description":"\u003cp\u003eThe Marlow and Reade arm built to a reach you specify, anywhere between 400mm and 1400mm. Ordered most often for a bed that sits further off the wall than the drawing assumed.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: reach specified by you, 400mm to 1400mm\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 6.5 kilograms\u003c\/li\u003e\n\u003cli\u003eCounterweight sized to the reach you order\u003c\/li\u003e\n\u003cli\u003eShade in linen, card or spun brass\u003c\/li\u003e\n\u003cli\u003ePlug in or hardwired, specified at order\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043559756,"sku":"SCH-BSP-002-DEP","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043592524,"sku":"SCH-BSP-002-FUL","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Solid_Brass_Swing_Arm_to_Your_Reach.jpg?v=1789048207"},{"product_id":"atelier-sconce-house-bespoke-finish-matching-service-on-any-fitting","title":"Atelier Sconce House Bespoke Finish Matching Service on Any Fitting","description":"\u003cp\u003eSend us a sample of the metalwork you are matching, a door handle or a tap will do, and we will mix a finish to it and apply it to your fitting. The sample comes back with the light.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: applies to any fitting in the catalogue\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 4.0 kilograms\u003c\/li\u003e\n\u003cli\u003eTwo sample plates issued for approval before the fitting is finished\u003c\/li\u003e\n\u003cli\u003eWorks over brass, bronze and steel\u003c\/li\u003e\n\u003cli\u003eAdds 3 to 4 weeks to the standard lead time\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043658060,"sku":"SCH-BSP-003-DEP","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043690828,"sku":"SCH-BSP-003-FUL","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Finish_Matching_Service_on_Any_Fitting.jpg?v=1789048027"},{"product_id":"atelier-sconce-house-bespoke-plaster-sconce-cast-from-your-drawing","title":"Atelier Sconce House Bespoke Plaster Sconce Cast From Your Drawing","description":"\u003cp\u003eSend a drawing, a photograph or a piece of a broken original and we will model it, make a mould and cast it. Most often used to replace a missing sconce in a listed building.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: any form up to 700mm tall\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 9.0 kilograms\u003c\/li\u003e\n\u003cli\u003eClay model photographed and approved before the mould is made\u003c\/li\u003e\n\u003cli\u003eMould retained for ten years so you can order a match later\u003c\/li\u003e\n\u003cli\u003eSuitable for listed building consent submissions\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.0 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043723596,"sku":"SCH-BSP-004-DEP","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043756364,"sku":"SCH-BSP-004-FUL","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Plaster_Sconce_Cast_From_Your_Drawing.jpg?v=1789047970"},{"product_id":"atelier-sconce-house-bespoke-picture-light-cut-to-a-non-standard-length","title":"Atelier Sconce House Bespoke Picture Light Cut to a Non Standard Length","description":"\u003cp\u003eAny length between 200mm and 1800mm in 50mm steps, with the LED board cut and the optic trimmed to suit. For a picture that sits between two of our stock sizes.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: 200mm to 1800mm in 50mm steps\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 4.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSingle continuous board, no visible joins\u003c\/li\u003e\n\u003cli\u003eCRI 97 warm white as standard, 3000K or 4000K to order\u003c\/li\u003e\n\u003cli\u003eFrame mounted or wall mounted\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043821900,"sku":"SCH-BSP-005-DEP","price":649.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043854668,"sku":"SCH-BSP-005-FUL","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Picture_Light_Cut_to_a_Non_Standard_Length.jpg?v=1789047993"},{"product_id":"atelier-sconce-house-bespoke-rewire-and-restoration-of-your-own-sconce","title":"Atelier Sconce House Bespoke Rewire and Restoration of Your Own Sconce","description":"\u003cp\u003eBring us a fitting you already own and we will strip it, clean it, rewire it to current standards and re-finish it if you want that. Antiques and inherited fittings are the usual work.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: one fitting, any size\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 4.0 kilograms\u003c\/li\u003e\n\u003cli\u003eFull rewire with silicone insulated cable and a new earth\u003c\/li\u003e\n\u003cli\u003ePAT test certificate issued on completion\u003c\/li\u003e\n\u003cli\u003eOriginal finish preserved unless you ask us to re-finish\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 4.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043920204,"sku":"SCH-BSP-006-DEP","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767043952972,"sku":"SCH-BSP-006-FUL","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Rewire_and_Restoration_of_Your_Own_Sconce.jpg?v=1789047885"},{"product_id":"atelier-sconce-house-bespoke-hotel-and-restaurant-specification-run","title":"Atelier Sconce House Bespoke Hotel and Restaurant Specification Run","description":"\u003cp\u003eA run of matched fittings for a project, priced per fitting with the price falling as the quantity rises. Photometric data, CE and UKCA documentation and a sample fitting are all part of it.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: minimum ten fittings\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 6.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSample fitting supplied and invoiced before the run is committed\u003c\/li\u003e\n\u003cli\u003ePhotometric files in IES and LDT format\u003c\/li\u003e\n\u003cli\u003eEmergency and DALI variants available\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 6.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767043985740,"sku":"SCH-BSP-007-DEP","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767044018508,"sku":"SCH-BSP-007-FUL","price":1099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Hotel_and_Restaurant_Specification_Run.jpg?v=1789048027"},{"product_id":"atelier-sconce-house-bespoke-bespoke-glass-shade-blown-to-a-broken-original","title":"Atelier Sconce House Bespoke Bespoke Glass Shade Blown to a Broken Original","description":"\u003cp\u003eSend us the pieces. If enough of the profile survives we can take a section from it, make a mould and blow a replacement in matching glass.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: one shade, up to 300mm in any direction\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eProfile drawing issued from the fragments for approval\u003c\/li\u003e\n\u003cli\u003eOpal, clear, ribbed and coloured glass all possible\u003c\/li\u003e\n\u003cli\u003eMould retained for five years\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.0 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767044116812,"sku":"SCH-BSP-009-DEP","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767044149580,"sku":"SCH-BSP-009-FUL","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Bespoke_Glass_Shade_Blown_to_a_Broken_Original.jpg?v=1789047993"},{"product_id":"atelier-sconce-house-bespoke-crystal-sconce-restrung-to-a-historic-pattern","title":"Atelier Sconce House Bespoke Crystal Sconce Restrung to a Historic Pattern","description":"\u003cp\u003eWe take an existing frame, research the correct trimming for its date and restring it in period cut crystal. Country house work mostly, where somebody in the nineteen seventies hung the wrong drops on a Georgian frame.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: one fitting, any size\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 5.5 kilograms\u003c\/li\u003e\n\u003cli\u003eWritten note on the pattern chosen and why\u003c\/li\u003e\n\u003cli\u003ePeriod cut crystal sourced to match, or newly cut to the old profile\u003c\/li\u003e\n\u003cli\u003eOriginal crystals returned in a labelled box\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.5 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767044837708,"sku":"SCH-BSP-010-DEP","price":669.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767044870476,"sku":"SCH-BSP-010-FUL","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Crystal_Sconce_Restrung_to_a_Historic_Pattern.jpg?v=1789048254"},{"product_id":"atelier-sconce-house-bespoke-wall-light-made-to-match-an-existing-ceiling-fitting","title":"Atelier Sconce House Bespoke Wall Light Made to Match an Existing Ceiling Fitting","description":"\u003cp\u003eYou have a chandelier or a pendant you like and nothing on the wall goes with it. Send photographs and dimensions and we will draw a sconce in the same language.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: sized to suit the room, up to 800mm\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 7.0 kilograms\u003c\/li\u003e\n\u003cli\u003eScale drawing issued against a photograph of your room\u003c\/li\u003e\n\u003cli\u003eMaterials and finish matched to the existing fitting\u003c\/li\u003e\n\u003cli\u003eTwo to six matching sconces from the same drawing\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 7.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767044903244,"sku":"SCH-BSP-011-DEP","price":799.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767044936012,"sku":"SCH-BSP-011-FUL","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Wall_Light_Made_to_Match_an_Existing_Ceiling_Fitting.jpg?v=1789047970"},{"product_id":"atelier-sconce-house-bespoke-integrated-dimming-and-control-specification","title":"Atelier Sconce House Bespoke Integrated Dimming and Control Specification","description":"\u003cp\u003eFor a project where the wall lights have to work with a control system. We build the drivers, the addresses and the emergency provision into the fittings rather than leaving it to the installer.\u003c\/p\u003e\u003cp\u003eBespoke work runs to a set sequence so nobody is surprised. You tell us what you need, we quote, you pay a fifty per cent deposit, we issue a drawing or a sample for your approval, and only then do we start making. The balance falls due when the piece is ready to leave the workshop. Nothing goes into production without your signature on the drawing.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight as specified, width as specified, projection from the wall as specified\u003c\/li\u003e\n\u003cli\u003eMaterials: specified at order, see the notes below\u003c\/li\u003e\n\u003cli\u003eFinish: any standard finish, or a bespoke finish matched to your sample\u003c\/li\u003e\n\u003cli\u003eLamp: specified at order, all our fittings are dimmable unless you ask otherwise\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: sized to cover your existing fixing where possible\u003c\/li\u003e\n\u003cli\u003eSizing: applies to any fitting, minimum four\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 5.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDALI 2, Casambi or 0 to 10V on request\u003c\/li\u003e\n\u003cli\u003eEmergency variants with a three hour battery\u003c\/li\u003e\n\u003cli\u003eCommissioning notes issued with the delivery\u003c\/li\u003e\n\u003cli\u003eDeposit: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eBespoke items are exempt from the 14 day cancellation right once making has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.0 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. We will send a mounting drawing with the quotation so your electrician can prepare the wall before delivery.\u003c\/p\u003e","brand":"Atelier Sconce House","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58767044968780,"sku":"SCH-BSP-012-DEP","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Complete commission, paid in full","offer_id":58767045001548,"sku":"SCH-BSP-012-FUL","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Atelier_Sconce_House_Bespoke_Integrated_Dimming_and_Control_Specification.jpg?v=1789047968"},{"product_id":"salvage-row-restored-nineteen-thirties-opaline-glass-wall-light-single","title":"Salvage Row Restored Nineteen Thirties Opaline Glass Wall Light Single","description":"\u003cp\u003eChrome and opaline glass from the years when English factories were still copying Paris. The glass is original and has the slight lens distortion you only get from hand finished opaline.\u003c\/p\u003e\u003cp\u003eEverything we sell has been through the same process. Stripped to components, cleaned by hand rather than blasted, rewired end to end with silicone insulated cable, fitted with new lampholders and a proper earth, then PAT tested and certificated. We do not re-plate or re-lacquer unless the original finish has failed, because a hundred years of patina is the reason to buy an antique in the first place. One fitting only. When it is gone it is gone.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight see photographs, width see photographs, projection from the wall see photographs\u003c\/li\u003e\n\u003cli\u003eMaterials: original materials, chrome over brass, replate available\u003c\/li\u003e\n\u003cli\u003eFinish: original finish retained, honest wear present\u003c\/li\u003e\n\u003cli\u003eLamp: rewired for E14 or E27 depending on the fitting, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: original backplate, may not cover a modern round pattress\u003c\/li\u003e\n\u003cli\u003ePeriod: circa 1934\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.8 kilograms\u003c\/li\u003e\n\u003cli\u003eFully rewired with a PAT test certificate\u003c\/li\u003e\n\u003cli\u003eSold as seen, with photographs of every mark before purchase\u003c\/li\u003e\n\u003cli\u003eOne only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 3.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Original backplates are often smaller than a modern pattress, so check what is behind your existing fitting before you take it off the wall.\u003c\/p\u003e","brand":"Salvage Row","offers":[{"title":"Rewired and PAT tested","offer_id":58767045820748,"sku":"SCH-ANT-003-RW","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Rewired with a plug in flex","offer_id":58767045853516,"sku":"SCH-ANT-003-PL","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Salvage_Row_Restored_Nineteen_Thirties_Opaline_Glass_Wall_Light_Single.jpg?v=1789048909"},{"product_id":"salvage-row-restored-victorian-cast-iron-wall-bracket-single","title":"Salvage Row Restored Victorian Cast Iron Wall Bracket Single","description":"\u003cp\u003eA heavy iron bracket off a railway building, stripped back to bare metal, phosphated and waxed. Not delicate and not trying to be.\u003c\/p\u003e\u003cp\u003eEverything we sell has been through the same process. Stripped to components, cleaned by hand rather than blasted, rewired end to end with silicone insulated cable, fitted with new lampholders and a proper earth, then PAT tested and certificated. We do not re-plate or re-lacquer unless the original finish has failed, because a hundred years of patina is the reason to buy an antique in the first place. One fitting only. When it is gone it is gone.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight see photographs, width see photographs, projection from the wall see photographs\u003c\/li\u003e\n\u003cli\u003eMaterials: original materials, cast iron, waxed\u003c\/li\u003e\n\u003cli\u003eFinish: original finish retained, honest wear present\u003c\/li\u003e\n\u003cli\u003eLamp: rewired for E14 or E27 depending on the fitting, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, 50Hz, terminal block behind the backplate\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch or a dimmer circuit\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: original backplate, may not cover a modern round pattress\u003c\/li\u003e\n\u003cli\u003ePeriod: circa 1878\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms\u003c\/li\u003e\n\u003cli\u003eFully rewired with a PAT test certificate\u003c\/li\u003e\n\u003cli\u003eSold as seen, with photographs of every mark before purchase\u003c\/li\u003e\n\u003cli\u003eOne only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. It is a heavy fitting at roughly 9.8 kilograms, so fix into masonry or into a timber noggin behind plasterboard rather than into the board alone. Original backplates are often smaller than a modern pattress, so check what is behind your existing fitting before you take it off the wall.\u003c\/p\u003e","brand":"Salvage Row","offers":[{"title":"Rewired and PAT tested","offer_id":58767051194700,"sku":"SCH-ANT-009-RW","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Rewired with a plug in flex","offer_id":58767051227468,"sku":"SCH-ANT-009-PL","price":929.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Salvage_Row_Restored_Victorian_Cast_Iron_Wall_Bracket_Single.jpg?v=1789048923"},{"product_id":"portland-lantern-works-portloe-solid-brass-wall-lantern-small","title":"Portland Lantern Works Portloe Solid Brass Wall Lantern Small","description":"\u003cp\u003eA six sided lantern in solid brass, unlacquered so it goes from gold to brown to a soft green over about three years. If you want it to stay gold, order it lacquered and accept that the lacquer will need redoing. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 230mm, projection from the wall 175mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 3.4 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767056863564,"sku":"SCH-EXT-001-UL","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767056896332,"sku":"SCH-EXT-001-LQ","price":569.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767056929100,"sku":"SCH-EXT-001-PA","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Portloe_Solid_Brass_Wall_Lantern_Small_a9916245-bfd9-4c2c-b62f-dae45bad6967.jpg?v=1789048660"},{"product_id":"portland-lantern-works-portloe-solid-brass-wall-lantern-medium","title":"Portland Lantern Works Portloe Solid Brass Wall Lantern Medium","description":"\u003cp\u003eA six sided lantern in solid brass, unlacquered so it goes from gold to brown to a soft green over about three years. If you want it to stay gold, order it lacquered and accept that the lacquer will need redoing. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 520mm, width 285mm, projection from the wall 220mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.8 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 4.8 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767057420620,"sku":"SCH-EXT-002-UL","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767057453388,"sku":"SCH-EXT-002-LQ","price":779.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767057486156,"sku":"SCH-EXT-002-PA","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Portloe_Solid_Brass_Wall_Lantern_Medium_cc8048a1-aa59-4aa4-bb6b-0fe567b3c117.jpg?v=1789048696"},{"product_id":"portland-lantern-works-portloe-solid-brass-wall-lantern-large","title":"Portland Lantern Works Portloe Solid Brass Wall Lantern Large","description":"\u003cp\u003eA six sided lantern in solid brass, unlacquered so it goes from gold to brown to a soft green over about three years. If you want it to stay gold, order it lacquered and accept that the lacquer will need redoing. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 620mm, width 340mm, projection from the wall 260mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.9 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 6.9 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767060730188,"sku":"SCH-EXT-004-UL","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767060762956,"sku":"SCH-EXT-004-LQ","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767060795724,"sku":"SCH-EXT-004-PA","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Portloe_Solid_Brass_Wall_Lantern_Large_dbe1769d-3ace-4d75-add2-e0224cfce977.jpg?v=1789048656"},{"product_id":"portland-lantern-works-rame-copper-wall-lantern-small","title":"Portland Lantern Works Rame Copper Wall Lantern Small","description":"\u003cp\u003eHand seamed copper with a glazed front, made the way a marine lantern is made. Copper goes brown quickly and green slowly, and on a coast it does both faster. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from sheet copper of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 400mm, width 220mm, projection from the wall 170mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid copper with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: copper, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 3.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767061942604,"sku":"SCH-EXT-006-UL","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767061975372,"sku":"SCH-EXT-006-LQ","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767062008140,"sku":"SCH-EXT-006-PA","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Rame_Copper_Wall_Lantern_Small_7d3ca4a8-2ad6-4efe-8a03-3821ea1d33f1.jpg?v=1789048831"},{"product_id":"portland-lantern-works-rame-copper-wall-lantern-medium","title":"Portland Lantern Works Rame Copper Wall Lantern Medium","description":"\u003cp\u003eHand seamed copper with a glazed front, made the way a marine lantern is made. Copper goes brown quickly and green slowly, and on a coast it does both faster. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from sheet copper of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 500mm, width 275mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid copper with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: copper, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.1 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 5.1 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767062565196,"sku":"SCH-EXT-007-UL","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767062597964,"sku":"SCH-EXT-007-LQ","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767062630732,"sku":"SCH-EXT-007-PA","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Rame_Copper_Wall_Lantern_Medium_5b2cd399-f458-4297-8846-45abef0ed961.jpg?v=1789048829"},{"product_id":"portland-lantern-works-salcombe-brass-half-lantern-small","title":"Portland Lantern Works Salcombe Brass Half Lantern Small","description":"\u003cp\u003eA half lantern that sits flat to the wall, for a porch or a passage where a full lantern would be in the way. Same construction, half the projection. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 340mm, width 185mm, projection from the wall 145mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 2.4 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767064924492,"sku":"SCH-EXT-011-UL","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767064957260,"sku":"SCH-EXT-011-LQ","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767064990028,"sku":"SCH-EXT-011-PA","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Salcombe_Brass_Half_Lantern_Small_bfbd46e6-51e0-4220-a237-46401aa33196.jpg?v=1789048806"},{"product_id":"portland-lantern-works-salcombe-brass-half-lantern-medium","title":"Portland Lantern Works Salcombe Brass Half Lantern Medium","description":"\u003cp\u003eA half lantern that sits flat to the wall, for a porch or a passage where a full lantern would be in the way. Same construction, half the projection. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 420mm, width 230mm, projection from the wall 175mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.3 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 3.3 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767065317708,"sku":"SCH-EXT-012-UL","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767065350476,"sku":"SCH-EXT-012-LQ","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767065383244,"sku":"SCH-EXT-012-PA","price":629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Salcombe_Brass_Half_Lantern_Medium_8fd3cfeb-a51d-4c79-b735-c80dd84ce81e.jpg?v=1789048867"},{"product_id":"portland-lantern-works-salcombe-brass-half-lantern-large","title":"Portland Lantern Works Salcombe Brass Half Lantern Large","description":"\u003cp\u003eA half lantern that sits flat to the wall, for a porch or a passage where a full lantern would be in the way. Same construction, half the projection. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 500mm, width 275mm, projection from the wall 210mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP54, weather rated for sheltered exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 4.6 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767066366284,"sku":"SCH-EXT-014-UL","price":799.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767066399052,"sku":"SCH-EXT-014-LQ","price":829.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767066431820,"sku":"SCH-EXT-014-PA","price":869.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Salcombe_Brass_Half_Lantern_Large_ed03c4ce-a726-4c80-adee-ee877c0a47be.jpg?v=1789048841"},{"product_id":"portland-lantern-works-trevose-heavy-marine-grade-brass-wall-light-small","title":"Portland Lantern Works Trevose Heavy Marine Grade Brass Wall Light Small","description":"\u003cp\u003eThe heavy one, cast rather than fabricated, with a 6mm toughened glass lens and a cast brass guard. Specified for exposed sites where a lighter lantern gets torn off the wall in a gale. Sold singly.\u003c\/p\u003e\u003cp\u003eMade in Cornwall from solid brass of a gauge that is heavier than it needs to be. Every seam is silver soldered, not glued and not riveted, and the glass is bedded on a silicone gasket that can be replaced without breaking anything. Marine grade stainless fixings are supplied because plated steel screws will streak the wall inside a winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 300mm, width 165mm, projection from the wall 105mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass with 4mm clear glass, 6mm toughened lens and a cast guard\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered as standard so it patinates, lacquered to order\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E27, maximum 60W, dimmable LED suitable\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, cable gland fitted in the base\u003c\/li\u003e\n\u003cli\u003eSwitching: no integral switch, wired to a wall switch, a photocell or a PIR\u003c\/li\u003e\n\u003cli\u003eRating: IP65, fully weather rated for exposed exterior walls\u003c\/li\u003e\n\u003cli\u003eBackplate: brass, gasketed, with marine grade stainless fixings\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.2 kilograms\u003c\/li\u003e\n\u003cli\u003eFixings: A4 marine grade stainless, supplied\u003c\/li\u003e\n\u003cli\u003eGlass: replaceable without special tools\u003c\/li\u003e\n\u003cli\u003ePhotocell and PIR versions available to order\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired exterior fitting and should be installed by a qualified electrician working to BS 7671. The gasket and cable gland are supplied. Bed the backplate onto a bead of neutral cure silicone and leave the lower edge open so any moisture can drain. At roughly 5.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light.\u003c\/p\u003e","brand":"Portland Lantern Works","offers":[{"title":"Unlacquered, will patinate","offer_id":58767067447628,"sku":"SCH-EXT-016-UL","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Lacquered","offer_id":58767067480396,"sku":"SCH-EXT-016-LQ","price":779.0,"currency_code":"GBP","in_stock":true},{"title":"Pre aged","offer_id":58767067513164,"sku":"SCH-EXT-016-PA","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Portland_Lantern_Works_Trevose_Heavy_Marine_Grade_Brass_Wall_Light_Small_242ba65e-af0e-4d37-8a70-11cce7696571.jpg?v=1789048881"},{"product_id":"marlow-and-reade-aveley-adjustable-bedside-reading-light-pair","title":"Marlow and Reade Aveley Adjustable Bedside Reading Light Pair","description":"\u003cp\u003eA small head on a stiff arm that stays where you point it, aimed at the page and not at the person next to you. The cut off is sharp enough that they can sleep.\u003c\/p\u003e\u003cp\u003eReading in bed is the one job a wall light does that a ceiling light cannot do at all, and most wall lights are not very good at it either. The rule we work to is that the light reaches the page and stops. That means a deep shade or a proper optic, a warm colour temperature, and a switch you can find without opening your eyes. Sold as a pair for either side of the bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 190mm, width 70mm, projection from the wall 150mm to 420mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass and steel\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes, applied to the metal itself\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: integral warm white LED, 5W, CRI 92\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, or plug in with the optional cord set\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round, 95mm diameter, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eAdjustable arm\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.2 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Fit it at about 1200mm off the floor, or 150mm above the top of the headboard, whichever is higher.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767097856332,"sku":"SCH-BED-002-AB","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767097889100,"sku":"SCH-BED-002-PB","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767097921868,"sku":"SCH-BED-002-PN","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767097954636,"sku":"SCH-BED-002-BZ","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Aveley_Adjustable_Bedside_Reading_Light_Pair.jpg?v=1789048265"},{"product_id":"marlow-and-reade-bledlow-brass-bedside-swing-arm","title":"Marlow and Reade Bledlow Brass Bedside Swing Arm","description":"\u003cp\u003eA single jointed brass arm with a small cone shade, the plainest reading light we make. Nothing on it to break and nothing to adjust except the arm.\u003c\/p\u003e\u003cp\u003eReading in bed is the one job a wall light does that a ceiling light cannot do at all, and most wall lights are not very good at it either. The rule we work to is that the light reaches the page and stops. That means a deep shade or a proper optic, a warm colour temperature, and a switch you can find without opening your eyes. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 220mm, width 120mm, projection from the wall 140mm to 480mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass and steel\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes, applied to the metal itself\u003c\/li\u003e\n\u003cli\u003eLamp: 1 x E14 candle, maximum 40W\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, or plug in with the optional cord set\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round, 95mm diameter, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eAdjustable arm\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eTakes any 2700K lamp\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.2 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Fit it at about 1200mm off the floor, or 150mm above the top of the headboard, whichever is higher.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767098511692,"sku":"SCH-BED-003-AB","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767098544460,"sku":"SCH-BED-003-PB","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767098577228,"sku":"SCH-BED-003-PN","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767098609996,"sku":"SCH-BED-003-BZ","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Bledlow_Brass_Bedside_Swing_Arm.jpg?v=1789048095"},{"product_id":"marlow-and-reade-dinton-twin-bedside-reading-light","title":"Marlow and Reade Dinton Twin Bedside Reading Light","description":"\u003cp\u003eTwo independently switched heads on one backplate, so one of you can read and the other cannot see it. Fitted above the middle of a headboard.\u003c\/p\u003e\u003cp\u003eReading in bed is the one job a wall light does that a ceiling light cannot do at all, and most wall lights are not very good at it either. The rule we work to is that the light reaches the page and stops. That means a deep shade or a proper optic, a warm colour temperature, and a switch you can find without opening your eyes. Sold singly.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight 180mm, width 440mm, projection from the wall 160mm to 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass and steel\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes, applied to the metal itself\u003c\/li\u003e\n\u003cli\u003eLamp: 2 x integral warm white LED, 5W each, CRI 92\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, or plug in with the optional cord set\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round, 95mm diameter, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eAdjustable arm\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 2.6 kilograms it is light enough for a good quality plasterboard anchor if there is no timber behind. Fit it at about 1200mm off the floor, or 150mm above the top of the headboard, whichever is higher.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767101264204,"sku":"SCH-BED-007-AB","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767101296972,"sku":"SCH-BED-007-PB","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767101329740,"sku":"SCH-BED-007-PN","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767101362508,"sku":"SCH-BED-007-BZ","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Dinton_Twin_Bedside_Reading_Light.jpg?v=1789048255"},{"product_id":"marlow-and-reade-dinton-twin-bedside-reading-light-pair","title":"Marlow and Reade Dinton Twin Bedside Reading Light Pair","description":"\u003cp\u003eTwo independently switched heads on one backplate, so one of you can read and the other cannot see it. Fitted above the middle of a headboard.\u003c\/p\u003e\u003cp\u003eReading in bed is the one job a wall light does that a ceiling light cannot do at all, and most wall lights are not very good at it either. The rule we work to is that the light reaches the page and stops. That means a deep shade or a proper optic, a warm colour temperature, and a switch you can find without opening your eyes. Sold as a pair for either side of the bed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight, per fitting: 180mm, width 440mm, projection from the wall 160mm to 400mm\u003c\/li\u003e\n\u003cli\u003eMaterials: solid brass and steel\u003c\/li\u003e\n\u003cli\u003eFinish: four finishes, applied to the metal itself\u003c\/li\u003e\n\u003cli\u003eLamp, per fitting: 2 x integral warm white LED, 5W each, CRI 92\u003c\/li\u003e\n\u003cli\u003eSupply: hardwired, 220 to 240V, or plug in with the optional cord set\u003c\/li\u003e\n\u003cli\u003eSwitching: rocker switch on the backplate\u003c\/li\u003e\n\u003cli\u003eRating: IP20, for dry indoor rooms\u003c\/li\u003e\n\u003cli\u003eBackplate: round, 95mm diameter, covers a single pattress\u003c\/li\u003e\n\u003cli\u003eAdjustable arm\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.2 kilograms for the pair\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eDimmable on a trailing edge dimmer\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eThis is a hardwired fitting and should be installed by a qualified electrician working to BS 7671. It arrives with a standard round backplate and fixing screws. Wall plugs are not supplied because the right fixing depends on whether you are going into brick, block, plasterboard or lath and plaster. At roughly 5.2 kilograms it needs a proper fixing. Use the supplied screws into masonry, or a heavy duty plasterboard anchor rated well above the weight of the light. Fit it at about 1200mm off the floor, or 150mm above the top of the headboard, whichever is higher.\u003c\/p\u003e","brand":"Marlow and Reade","offers":[{"title":"Antique brass","offer_id":58767102050636,"sku":"SCH-BED-008-AB","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Polished brass","offer_id":58767102083404,"sku":"SCH-BED-008-PB","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Polished nickel","offer_id":58767102116172,"sku":"SCH-BED-008-PN","price":689.0,"currency_code":"GBP","in_stock":true},{"title":"Bronze","offer_id":58767102148940,"sku":"SCH-BED-008-BZ","price":709.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/3128\/5324\/files\/Marlow_and_Reade_Dinton_Twin_Bedside_Reading_Light_Pair.jpg?v=1789048266"}],"url":"https:\/\/thesconcehouse.com\/collections\/300-to-1000-pounds.oembed?page=2","provider":"The Sconce House","version":"1.0","type":"link"}